Function Menu Table - Panasonic KX-TG2214F Operating Instructions Manual

Useful information:
• If Select is pressed while "---(Go back)---" is displayed, the unit will go
back to the previous menu mode. If you press the key in the main menu, the unit
will exit programming mode.
• After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table below.)
• You can exit programming mode any time by pressing [OFF].
• If you do not press any buttons for 60 seconds, the handset will exit programming
mode.
• If the handset has lost communication with the base unit, the handset beeps
3 times and "No link to base. Place on cradle and try again." is
displayed.
• If [ ], [ ] or any other buttons except [MUTE] and [OFF] is pressed while the
handset is on the base unit, the handset beeps 3 times and "Please lift up
and try again." is displayed. Lift the handset and press the button again.

Function Menu Table

You can use the following functions to customize your unit. See the corresponding
pages for function details.
• After pressing [MENU], you can also program menu items by direct commands
([0] to [9]) instead of using the soft keys (p. 39).
Main menu
Ringer setting
V.M. access
Voice enhancer
Initial setting
For assistance, please call: 1-800-211-PANA(7262)
Sub-menu I
Ringer volume
Ringer tone
p. 32
p. 13
LCD contrast
Auto talk
Caller ID edit
Set tel line
Voice Mail
Change language
Programmable Functions
p. 15
p. 16
p. 14
p. 14
p. 23
Set dial mode
Set flash time
Set line mode
Store VM access#
VM tone detect
p. 12
Sub-menu II
p. 12
p. 35
p. 16
p. 30
p. 31
11