Sanyo SAP-K71GJHA Technical & Service Manual page 84

Air Cleaning Filter
(not provided)
NOTE
How to install the air
cleaning filter
Cleaning the main unit and
remote control unit
Removing and remounting
the air intake grille
CAUTION
Washing the grille with
water
24
Care and Cleaning (continued)
The air cleaning filter removes dust and dirt from the air, and reduces
odors and smoke from tobacco.
The air cleaning filter is not provided with the air conditioner and must
be purchased separately. The first time that you buy the air cleaning
filter, it is necessary to get the STK-ARF4B-50 model with frame. When
changing the filter subsequently, it is only necessary to replace the filter
itself (model STK-F4B-50).
This air cleaning filter cannot remove harmful gases or vapors nor
ventilate air in the room. You must open doors or windows frequently
when you use gas or oil heating appliances. Otherwise there is a risk of
suffocation in extreme cases.
The air cleaning filter needs
to be installed behind the
anti-mold filter.
1. Remove the anti-mold
filter.
2. Install the air cleaning
filter in the position
shown in the diagram,
with the '' ''
symbols (meaning
''FRONT'') facing the
front.
3. Reinstall the anti-mold filter.
Wipe clean using a soft, dry cloth.
•
To remove stubborn dirt, moisten a cloth in warm water no hotter
•
than 40°C, wring thoroughly, and then wipe.
The air intake grille can be removed in order to wash it with water.
•
With the air intake grille
•
open all the way, grip
both arms with your
hands and pull toward
you to remove.
To remount, hold the air
intake grille roughly
horizontal and push it in
until the arm shafts fit
into the indentations in
the main unit, then fit the
grille into place.
When using a footstool or the like, be careful not to let it tip over.
Clean the grille gently using a soft sponge, or the like. Then wipe
•
away any remaining moisture.
Neutral detergent may be used to remove stubborn dirt. Then rinse
•
thoroughly with water and wipe away any remaining moisture.
Air
cleaning
filter
Air intake grille
Arm
OI-396-24EG