Paper Jam At The Top Of Duplex Path. Please Remove The Paper; Paper Jam Inside Of Duplex Path. Please Remove The Paper; Paper Jam At The Bottom Of Duplex Path. Please Remove The Paper - Samsung ProXpress M456x Series Service Manual

Table of Contents

Advertisement

► Error Code
M2–2212
M2–2214
M2–2310
► Error message

Paper jam at the top of duplex path. Please remove the paper

Paper jam inside of duplex path. Please remove the paper

Paper jam at the bottom of duplex path. Please remove the paper

► Symptom
The paper did not enter the duplex path and has jammed.
► Troubleshooting method
1) Remove the jammed paper. If the same error occurs continually, check the following.
2) Check if there are any obstacles or contamination in the duplex path.
3) Check if the exit actuator of the fuser unit works normally.
4) Check if the exit motor works normally and its connector is connected properly.
5) If the exit motor is defective, replace it or exit drive unit.
6) Check if the duplex clutch works normally and its connector is connected properly.
7) If the duplex clutch is defective, replace it.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Troubleshooting
4-95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-m4560fxSl-m4562fx

Table of Contents