Table of Contents
Advertisement
Troubleshooting
Messages/Second messages
Close
Front Cover
Close Rear/Paper
Exit Cover
Close
Mailbox Cover
Close Upper
Tray Cover
Energy Save Mode
Hardware Problem DIM
5
Hardware Problem
Ethernet
62
Description
The front cover is open.
The paper exit cover or the
rear cover is open.
The cover of the Mailbox is
open.
The cover of the output 1-bin
Tray is open.
The printer is in Energy Saver
mode.
An error has occurred in the
printer.
An error has occurred in the
optional Network Interface
Board.
Solution
Close the front cover.
Close the paper exit cover or
the rear cover.
Close the cover of the Mail-
box.
Close the cover of the output
1-bin Tray.
Wait for a while.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
First, turn off the power
switch and then on. If the mes-
sage appears again, call your
sales or service representative.
Turn off the power switch .
Replace the Network Interface
Board and turn on the power
switch. See "Network Interface
Board Type 2610" in the Setup
Guide.
Turn off the power switch, re-
move the Network Interface
Board and turn on the power
switch.
Note
❒ If you remove the Net-
work Interface Board, you
cannot print over the net-
work. You can send a print
jobs to the printer only via
a parallel cable connection.
Advertisement
Table of Contents
