Table of Contents
Advertisement
OK/Cancel
See "Buttons common to every menu" on page 31.
76
Setting the Alarm Buffer — Alarm buffer Menu
Setting the Alarm Buffer
— Alarm buffer Menu
When you click
the Alarm buffer menu appears.
You can set the Pre-alarm image and audio (the image
and audio before the alarm detection) and the Post -
alarm image and audio. These can be set when Alarm
sending of FTP client menu or Alarm recording of
Image memory menu is set to On, besides when Use
alarm buffer is selected.
Mode
Displays the video codec selected in the Video codec tab
of the Camera menu.
Note
You cannot set the alarm buffer when H.264 is selected
in the Video codec tab of the Camera menu.
Codec
Only the currently available codec(s) are active. Select
the video codec to be used for the alarm buffer.
Note
When Dual codec is selected in the Video codec tab of
the Camera menu and if you select here a video codec
different from the priority video codec specified for
Dual codec, the bit rate and frame rate for sending/
recording via the alarm buffer may be lower than the set
values.
Recording capacity
Displays the maximum recording capacity of the alarm
buffer in the present camera setting of the video mode,
image size, bit rate and frame rate.
in the Administrator menu,
Advertisement
Table of Contents
