Table of Contents
Advertisement
• Use a soft, dry cloth to clean the external surfaces of
the camera. Stubborn stains can be removed using a
soft cloth dampened with a small quantity of detergent
solution, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene
or thinners as they may damage the surface finishes.
Note on laser beams
Laser beams may damage a CCD. You are cautioned
that the surface of a CCD should not be exposed to
laser beam radiation in an environment where a laser
beam device is used.
6
How to Use This User's Guide
How to Use This User's
Guide
This User's Guide explains how to operate the SNC-
RX550N/RX550P Network Camera from a computer.
The User's Guide is written to be read on the computer
display.
As this section gives tips on using the User's Guide, read
it before you operate the camera.
Jumping to the related page
When you read the User's Guide on the computer
display, click on the sentence to jump to the related page.
Software display examples
Note that the displays shown in the User's Guide are
explanatory examples. Some displays may be different
from the ones which appear as you operate the
application software.
Printing the User's Guide
Depending on your system, certain displays or
illustrations in the User's Guide, when printed out, may
differ from those as portrayed on your screen.
Installation Manual (printed matter)
The supplied Installation Manual describes the names
and functions of parts and controls of the Network
Camera, connecting examples and how to set up the
camera. Be sure to read the Installation Manual before
operating.
Advertisement
Table of Contents
