Accessories/Options - Panasonic Viera TH-65PX600 Operating Instructions Manual

Accessories/Options

Check you have all the items shown.
Accessories
Remote Control
Transmitter
•
EUR7737Z40
Cable clamper
(2)
Operating Instructions
Notice about "Downloadable Region Rating Table (RRT) system"
Installing remote's batteries
Open
1
Hook
Caution
•
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or break batteries.
•
Make a note of the remote control codes before changing batteries in case the codes are reset. (p. 47-48)
Optional accessories
Wall-hanging bracket
(vertical)
•
TY-WK65PV7
Note
•
In order to maintain the unit's performance and safety, be absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets.
•
Carefully read the instructions accompanying the speaker or pedestal, and be absolutely sure to take steps to
prevent the TV from tipping over.
•
Handle the TV carefully during installation since subjecting it to impact or other forces may cause its paneling to
crack.
6
Batteries for the Remote Antenna Adapter
•
Control Transmitter F-Type
(2)
•
for 5C-2V
AA Battery
AC cord
IR Blaster
Product Registration Card Customer Care Plan Card
(U.S.A.) (U.S.A.)
2
Note the correct polarity (+ or -).
Pedestal Speakers
TY-ST65PV500 TY-SP65PV600
Connection
Swing up the door at "PULL".
Connect the AV terminals (INPUT 3)
VCR / S-VIDEO VCR
DVD PLAYER
CAMCORDER /
S-VIDEO CAMCORDER
Connect the HDMI terminal (HDMI 3 AUDIO IN)
Close
HDMI compatible
machine only
If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal.
Connect the audio cables to the AUDIO L-R terminals when using a DVI to HDMI adapter cable.
Audio settings can be made on the "HDMI1 in", "HDMI2 in" or "HDMI3 in" menu screen. (p. 28-29)
Note
•
When connecting to HDMI 3, set the input mode to "HDMI 3" (p. 26) initially before connecting to HDMI 3. After
connection, confirm the HDMI control functions (p. 32-33).
•
This input terminal is not intended for use with computers.
•
All signals will be re-formatted to view on your display.
•
If the external devices have the aspect adjustment, set to 16:9.
•
For applicable HDMI signals information see page 52.
Setting of this unit after connection
After making connections as shown above, set "Ctrl with HDMI" (under "Other adjust") to "On" using the Setup
menu. (p. 32).
S VIDEO VIDEO
SD CARD slot
Connect the S VIDEO or VIDEO terminal.
S VIDEO
S-Video
OUT
VIDEO
Video
OUT
AUDIO
L
Audio
OUT
R
L
Audio
OUT
R
HDMI cable
HDMI
OUT
INPUT3 3
L-AUDIO-R HDMI3 AUDIO IN AV IN
or
7