Components (Engine) - MULTIQUIP Whiteman LD6SL Operation Manual

Hydraulic ride-on trowel
Table of Contents

Advertisement

8
7
1. Fuel Pump — Delivers gasoline fuel to the engine.
2. Oil Fill Cap — Remove the cap to add fresh engine
oil. Refer to the Inspection or Maintenance section
for more information.
3. Oil Dipstick — Remove to check the amount and
condition of oil in the crankcase.
4. Spark Plug — Provides spark to the ignition system.
Set the spark plug gap to 0.030 in. (0.76 mm).
5. Starter — Starts the engine when the ignition key is
rotated to the START position.
6. Oil Drain Plug — Remove to drain engine oil.
7. Blower Housing — Contains the air cooling system.
8. Muffler Mounting Bracket — Secures the muffler to
the trowel frame.
9. Air Cleaner — Prevents dirt and debris from entering
the engine cylinders.
LD6/LD6SL RIDE-ON POWER TROWEL • OPERATION MANUAL — REV. #6 (02/13/23) — PAGE 25
1
2
3
4
5
6
Figure 11. Vanguard Engine Components

COMPONENTS (ENGINE)

9
16
15
10. Muffler — Reduces noise and emissions. NEVER
touch the muffler while the engine is running.
11. Exhaust Pipe — Transports harmful exhaust gases
away from the engine interior.
12. Oil Cooler — Maintains engine oil temperature and
viscosity.
13. Engine Mounting Bracket — Secures the engine to
the trowel frame.
14. Oil Filter — Filters engine oil contaminants.
15. Hydraulic Pump — Variable displacement, axial piston
pump drives the motors that turn the blades.
16. Amplifier — Receives input from the rotor speed
control lever and sends proportional output current to
the hydraulic pump valve.
10
11
12
13
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Whiteman ld6

Table of Contents