Naming A Track Or Md - Sony MDS-S40 Operating Instructions Manual

Nam ing a Track or M D
You can enter a name for a recorded MD as well as for
individual tracks. Names can consist of uppercase and
lowercase letters, numbers, and symbols. A total number
of 1,700 characters can be stored for all the names on the
MD.
LEVEL/ DISPLAY/ CHAR
` / 1
YES
M ENU/ NO
NAM E
m/M
Note
If you name a track while it is being recorded, be sure to finish
the naming operation before the track ends. If the track ends
before you finish, the entered character data will be discarded
and the track will remain unnamed. Also, you can't name tracks
while the deck is recording over existing material.
Nam ing a t rack or M D using t he cont rols
on t he deck
1
Press M ENU/ NO w hile the deck is in one of the
operating statuses listed below, depending on
w hat you w ant to name:
To name
A track or the MD
The track being recorded
"Edit Menu" appears in the display.
Downloaded from: https://www.usersmanualguide.com/
M ENU/ NO AM S YES
Z N
X x
. >
m M
m/M
CLEAR
` / 1
Z
CLEAR
CHAR
Letter/ number
buttons
X . >
H
X
z x
./>
. >
+
m M
–
Press w hile the deck is
Stopped, playing, or paused
Recording the track
2
Turn AM S until "Name ?" appears, then press AM S
or YES.
While the deck is recording, a flashing cursor appears
in the display and you can enter a name for the track
being recorded. In this case, go to step 6.
3
Turn AM S until "Nm In ?" appears, then press AM S
or YES.
4
Turn AM S until the track number (w hen naming a
track) or "Disc" (w hen naming the M D) flashes,
z
then press AM S or YES.
5
Press AM S or YES again.
A flashing cursor appears.
6
Press LEVEL/ DISPLAY/ CHAR repeatedly to select the
character type.
To select
Uppercase letters
Lowercase letters
Numbers
*
Symbols
The following symbols can be selected:
*
! " # $ % & ' ( ) * + , – . / : ; < = > ? @ _ `
To ent er a space
Press M while the cursor is flashing.
7
Turn AM S to select the character.
The selected character flashes.
To change a select ed charact er
Repeat steps 6 and 7.
Press repeatedly until
"A" appears in the display
"a" appears in the display
"0" appears in the display
"!" appears in the display
A
D
33