Handling Mds; System Limitations - Sony MDS-S40 Operating Instructions Manual

Handling M Ds
The MD is enclosed in a cartridge to protect the disc from
debris or fingerprints and to make it easy to handle.
However, the presence of debris or a warped cartridge
may inhibit the disc from operating properly. To assure
that you can always listen to the highest quality music,
follow the precautions below:
• Do not touch the internal disc directly. Forcing the
shutter open may damage the internal disc.
• Be sure to stick the labels supplied with the MD to the
appropriate positions. The shape of the labels may vary
depending on the MD brand.
Proper location
of the labels
Where t o keep t he M Ds
Do not place the cartridge where it may be exposed to
direct sunlight or extremely high heat and humidity.
Regular m aint enance
Wipe dust and debris from the surface of the cartridge
with a dry cloth.
Syst em Lim it at ions
The recording system in your deck is radically different
from those used in cassette and DAT decks and is
characterized by the limitations described below. Note,
however, that these limitations are due to the inherent
nature of the MD recording system itself and not to
mechanical causes.
" Disc Full" appears in t he display even bef ore
t he M D has reached t he m axim um recording t im e
(60 or 74 m inut es)
When 255 tracks have been recorded on the MD,
"Disc Full" appears regardless of the total recorded time.
More than 255 tracks can't be recorded on the MD. To
continue recording, erase unnecessary tracks or use
another recordable MD.
" Disc Full" appears bef ore t he m axim um num ber
of t racks is reached
Fluctuations in emphasis within tracks are sometimes
interpreted as track intervals, incrementing the track
count and causing "Disc Full" to appear.
40
Downloaded from: https://www.usersmanualguide.com/
The rem aining recording t im e does not increase
even af t er erasing num erous short t racks
Tracks under 12 seconds in length are not counted and so
erasing them may not lead to an increase in the recording
time.
The t ot al recorded t im e and t he rem aining
recordable t im e on t he M D m ay not t ot al t he
m axim um recording t im e (60 or 74 m inut es)
Recording is done in minimum units of 2 seconds each, no
matter how short the material. The contents recorded
may thus be shorter than the maximum recording
capacity. Disc space may also be further reduced by
scratches.
Lim it at ions w hen recording over an exist ing
t rack
Shutter
• The correct remaining recordable time may not be
displayed.
• You may find it impossible to record over a track if that
track has been recorded over several times already. If
this happens, erase the track (see page 29).
• The remaining recordable time may be shortened out of
proportion to the total recorded time.
• Recording over a track to eliminate noise is not
recommended since this may shorten the duration of
the track.
• You may find it impossible to name a track while
recording over an existing track.
Tracks creat ed t hrough edit ing m ay exhibit
sound dropout as you're searching f or a point
w hile m onit oring t he sound.
Som e t racks can't be com bined w it h ot hers
Tracks may not be combined if they have been edited.
Track num bers are not m arked correct ly
Incorrect assignment or marking of track numbers may
result when CD tracks are divided into several smaller
tracks during digital recording. Also, when the
Automatic Track Marking is activated during recording,
track numbers may not be marked as in the original,
depending on the program source.
" TOC Reading" appears f or a long t im e
If the inserted recordable MD is brand new, "TOC
Reading" appears in the display longer than for MDs that
have already been used.
The correct recorded/playing t im e m ay not be
displayed during playback of M Ds recorded in
m onaural m ode.