Advertisement
5.
CHARGING
IMPORTANT! CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS. Failure to do this will
reduce the battery's capacity and may void the warranty.
5.1 Connect the micro USB end of the charging cable to the micro USB port on the back
of the work light. Insert the USB end of the cable into the USB port on your charger.
5.2 Plug your charger into a live power source.
5.3 The charging LED will light RED, to indicate charging has begun.
5.4 When the battery is fully charged, the charging LED will change to GREEN.
5.5 Recharge the work light after use, and at least every 6 months.
6.
OPERATING INSTRUCTIONS
6.1 Hang the work light, using the hook on the back. The work light can be rotated
360° for more precise positioning.
6.2 The magnet may be used instead. Attach to any ferrous metal surface.
6.3 Direct the lens away from your eyes before turning on the work light.
6.4 Press
once to turn on the 1W end LED.
Press
a second time to turn on the SMD LEDs.
Press
to turn off.
6.5 Recharge the work light after use, and at least every 6 months.
VOTING
Advertisement
