Controls And Connections - Blaupunkt BSB210DWS Instruction Manual

CONTROLS AND CONNECTIONS

HDMI
Connect a HDMI cable (not supplied) from your TV HDMI/ARC port to the HDMI socket on
the soundbar. Then change the mode on your soundbar to HDMI Mode.
Note: To enable the Audio Return Channel (ARC) feature, the HDMI must be connected to
an ARC enabled HDMI on your TV. (go to next page for details on ARC).
OPTICAL
Plug in the optical cable (not supplied) from your Soundbar to the TV optical port.
Once connected, change the Mode to OPTICAL from the unit or remote control.
Note: If there is no sound, make sure that the audio settings on your TV is set to
appropriate mode.
IMPORTANT INFORMATION
This unit may not be able to decode all digital audio formats from the input source. In this
case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby (Refer to the user
manual of the input source device for its audio setting details) with optical.
10