Setting Up The Power Save Mode - Panasonic Lumix DMC-LC40 Operating Instructions Manual

Setting up the Power Save Mode

REC
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO. RESET
CLOCK SET
SELECT:
• If you want to cancel the power save mode, turn the power switch to [ON] again after
turning it to [OFF], or press the shutter button.
• When using the AC adaptor, the power save mode is not available.
• In power save mode, or if the battery charge is low and you have to charge it, turn the
camera off and connect the AC adaptor to the camera DC IN socket. If connecting the AC
adaptor when the power switch is set to [ON], the camera may not function correctly.
80
SETUP
2 MIN. 5 MIN.
SET EXIT
When setting this mode, the camera, if it is
not operated for about 2, 5 or 10 minutes, it is
automatically turned off.
1
Press the [MENU] button.
2
Press 1 to open the setup menu.
3
Press 3/4 to select [POWER SAVE].
4
Press 2/1 to choose the setting time.
• You can choose among [2 MIN.], [5 MIN.]
and [10 MIN.].
• If selecting [OFF], the power is not turned off
automatically.
5
Press the [MENU] button.
• The menu will disappear.