Using The Auto Review - Panasonic Lumix DMC-LC40 Operating Instructions Manual

Using the Auto Review

REC
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO. RESET
CLOCK SET
SELECT:
• In burst mode [
• Even when setting the auto review to [ON], it is not available in motion image mode [
• When recording in burst mode [
the auto review is set to [ON].
78
SETUP
2 MIN.
EXIT
SET
] or auto bracket, only the first recorded picture is displayed.
], auto bracket, TIFF or still picture with audio modes,
Recording with the auto review set to [ON],
the recorded picture is automatically
displayed on the LCD monitor for about 2
seconds.
[Preparation]
Set the operational mode dial to REC mode
(single mode [ ] or burst mode [
1
Press the [MENU] button.
2
Press 1 to open the setup menu.
3
Press 3/4 to select [AUTO REVIEW].
4
Press 2/1 to select [ON].
5
Press the [MENU] button.
• The menu will disappear.
]).
].