Setting Up The Power Save Mode - Panasonic LUMIX DMC-FZ2EN Operating Instructions Manual

Setting up the Power Save Mode

1,5
2,3,4
3,4
REC
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
2MIN. 5MIN. 10MIN. OFF
SELECT SET
• If you want to cancel the power save mode, turn the power switch to [ON] again
after turning it to [OFF], or press the shutter button.
• When using the AC adaptor/connecting to a PC/recording the motion image/
playing back the motion image/during Slide Show, the power save mode is not
available.
• In simple mode [
Technical use
In this mode, if the camera is not operated for
a certain amount of time, it is automatically
turned off.
1
2
3
4
SETUP 1 / 2
5
OFF
EXIT
MENU
], the power save is fixed to [2MIN.].
84
Press the [MENU] button.
Press 1 to open the setup menu.
Press 3/4 to select [POWER SAVE].
Press 2/1 to choose the setting time.
• [2MIN.]
• [5MIN.]
• [10MIN.]
• [OFF]: the power is not turned off
automatically.
Press the [MENU] button.
• The menu will disappear.