[Aspect Ratio]; Setting The Aspect Ratio Of Pictures - Panasonic Lumix DMC-FX50 Operating Instructions Manual

Menu Settings
• If you select [ ], digital zoom, auto
bracket and slow shutter cannot be used.
• Depending on the brightness and how fast
the subject is moving, jitter may not be
avoided even if [ ] is selected.
• The camera may not be able to detect the
movement of the subject in the following
cases.
– When the moving subject is small
– When the moving subject is at the edge
of the screen
– When the subject starts moving the
instant the shutter button is pressed fully
• ISO sensitivity is automatically set to the
following optimal value in [HIGH SENS.]
(P55) in scene mode.
– [ISO3200]
• To avoid picture noise, we recommend
decreasing the ISO sensitivity or setting
[PICT.ADJ.] to [NATURAL]. (P79)
• ISO sensitivity cannot be set in the
following cases.
– Simple mode [ ]
– Motion picture mode [
– Scene mode
74
VQT0Y19

[ASPECT RATIO]

Setting the aspect ratio of pictures

Press [
MENU
/SET
menu and select the item to set. (P70)
By changing the aspect ratio, you can
select an angle of view that matches the
subject.
Select to take pictures with the
same aspect ratio as a 4:3 TV or a
PC monitor.
Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.
]
This is suitable for landscapes etc.
where a wide view is preferable.
This is also suitable for playing
back pictures on a wide-screen
TV, high-definition TV etc.
• In motion picture mode [
select [
• The ends of the recorded pictures may be
cut at printing. (P110)
] to display the [REC] mode
], you can
] or [ ]. (P62)