Setting Date/Time (Clock Set); Changing The Clock Setting - Panasonic Lumix DMC-FX50 Operating Instructions Manual

Setting Date/Time
(Clock Set)
Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
OFF ON
PLEASE SET THE CLOCK
MENU
CLOCK SET
: [MENU/SET] button
1 Press [MENU/SET].
2 Move
/ / /
to select the
date and time.
:
:
CLOCK SET
00 00 : JAN 11 2006 . .
M/D/Y
CANCEL
SELECT SET EXIT
: Time at the home area
: Time at the travel destination (P59)
• / : Select the desired item
• / : Set the display order for the date
and time.
• Press [ ] to cancel the clock setting
without storing the date and time.
• Refer to [WORLD TIME] (P59) for
information about setting the local time
at the travel destination area.
3 Press [MENU/SET] several times
to close the menu.
• Turn the camera off after finishing
setting the clock. Then turn it on and
check that the clock setting is correct.

Changing the clock setting

1 Press [MENU/SET].
2 Move
(P70)
3 Move
to set the clock.
• You can also set the clock in the
[SETUP] menu. (P18)
• When a fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If the date is not set in the camera it will
not be printed when you use a photo
printing service, even if the store provides
a date printing option for your
photographs. (P86)
MENU
.
Preparation
/ to select [CLOCK SET].
2
and then perform steps and
3 /
REC
3
COL.EFFECT OFF
PICT.ADJ. STANDARD
CLOCK SET
MENU
SELECT EXIT
VQT0Y19
3
17