Self-Timer Recording; Recording Images For Wide-Screen Tvs; Image Stabilizer Function - Panasonic Palmcorder MultiCam PV-GS65 Operating Instructions Manual

Self-timer recording

You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
1
Set [BASIC] >> [SELF TIMER] >> [YES].
2
Press the [PHOTO SHOT] button.
≥After the recording lamp and the [
indication flashes for approx. 10 seconds,
recording will start. After recording, the
self-timer will be canceled.
ª
To stop the timer midway through
Press the [MENU] button.
≥By operating the [OFF/ON] switch or mode dial,
the self-timer standby mode is canceled.
≥If the RapidFire Consecutive Photoshot
recording is set, the maximum recordable
pictures are recorded.
Recording images for wide-screen
TVs
This allows you to record images compatible with
wide-screen TVs.
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
1
Set [ADVANCE] >>[CINEMA] >> [ON].
ª To cancel the Cinema function
Set [ADVANCE] >>[CINEMA] >> [OFF].
≥Images played back vary depending on the TV
connected. Please refer to the operating
instructions for your TV.
≥This function does not widen the recording
range.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥When a cinema picture is imported onto a
personal computer, the imported picture may
not be displayed correctly, depending on the
software used.
32
LSQT0860
Record mode
PHOTO
SHOT
]
CINEMA

Image stabilizer function

Reduces the jitter caused by hand movement
when recording.
≥Set to Tape Recording Mode.
1
Set [ADVANCE] >> [EIS] >> [ON].
ª
To cancel the image stabilizer function
Set [ADVANCE] >> [EIS] >> [OFF].
≥When a tripod is used, we recommend that you
turn the image stabilizer function off.
≥Under fluorescent lighting, image brightness
may change or colors may not look natural.
≥When the MagicPix function is used, the image
stabilizer function does not work. If so, the [EIS]
indication flashes.
≥In the following cases, the image stabilizer
function may not work effectively.
≥When the digital zoom is used
≥When recording is done in an extremely dark
place
≥When the Camcorder is shaken greatly
≥When you record a moving subject while
tracking it
EIS