Panasonic NV-GS230 Operating Instructions Manual page 52

VQT1D15ENG.book 52 ページ ２００６年１０月３０日 月曜日 午後８時２３分
Playback (Sound)
1: Sound is not played back from the built-in
speaker of the movie camera or the
headphones.
0 Is the volume too low? During playback, push
the [s /VOLr] lever to display the volume
indication and adjust it. (
2: Different sounds are reproduced at the
same time.
• Have you set [SETUP] >> [12bit AUDIO] >>
[MIX]? If you set [AUDIO REC] >> [12bit] and
dub audio to a recorded tape, you can hear the
sound on recording and the sound dubbed at a
later time. To hear the sounds separately, set
to [ST1] or [ST2]. ( )
-41-
• Have you set [SETUP] >> [AUDIO OUT] >>
[STEREO] and reproduced a picture containing
the main sound and sub sound? Set to [L] to
hear main sound, and set to [R] to hear the sub
sound. ( )
-46-
3: Audio dubbing cannot be performed.
• Is the accidental erasure prevention slider on
the cassette open? If it is open (set to [SAVE]),
audio dubbing cannot be performed. (
• Are you attempting to edit a tape portion that
was recorded in LP mode? LP mode does not
allow audio dubbing. (
-19-
4: The original sound was erased when audio
dubbing was performed.
• If you perform audio dubbing on a recording
made in [16bit] mode, the original sound will be
erased. If you wish to preserve the original
sound, be sure to select [12bit] mode when
recording.
5: Sounds cannot be played back.
• Although a cassette with no audio dubbing is
being played, have you set [SETUP] >>
[12bit AUDIO] >> [ST2]? To play back a
cassette with no audio dubbing, set
[12bit AUDIO] >> [ST1]. (
• Is the variable speed search function working?
Press the [VAR SEARCH] button on the remote
control to cancel the variable speed search
function. ( )
-34-
6: Noise is heard from the right headphone.
• Have you set [BASIC] >> [AV JACK] >> [OUT]?
When you use the headphones, set to [OUT/
Ë].
52
VQT1D15
Others
Playback (Pictures)
1: Mosaic-pattern noise appears on images
• This phenomenon is characteristic of digital
2: Horizontal stripes appear on images during
)
-33-
• Horizontal stripes may appear depending on
3: Although the movie camera is correctly
• Have you selected video input on the TV?
4: Playback picture is not clear.
• Are the heads of the movie camera dirty? If the
• If the terminal for the AV cable is soiled, noises
)
-11-
• Is a picture containing a copyright protection
)
Card
1: Recorded pictures are not clear.
• Have you set [BASIC] >> [PICT. QUALITY] >>
2: A file recorded on a card cannot be deleted.
• Is the file locked? Locked files cannot be
)
-41-
• For the SD Memory Card, if its write protect
3: Photoshot playback images do not look
• The picture may be damaged. In order to
4: Even if a card is formatted, it cannot be
• Either the movie camera or the card may be
during cue or review playback.
video systems. It is not a malfunction.
cue and review playback.
the scene, but this is not a malfunction.
connected to a TV, playback images cannot
be seen.
Please read the operating instructions of your
TV and select the channel that matches the
input terminals used for the connection.
heads are dirty, playback image cannot be
clear. Clean the heads by using the head
cleaner for digital video. (
-54-
may appear on the screen. Wipe the soil off the
terminal with a soft cloth, and then connect the
cable to the AV terminal.
signal (copy guard) being recorded? When a
protected picture is played back by the movie
camera, mosaic-like patterns appear on the
picture.
[ ]? If recording is done with it set to [
pictures with fine details may include a
mosaic-like pattern. Set [PICT. QUALITY] >>
[ ]. ( )
-22-
deleted. ( )
-37-
switch is set to [LOCK], then deletion is
disabled. ( )
-12-
normal.
prevent the loss of image data, backing up on a
cassette or a personal computer is
recommended.
used.
damaged. Please consult a dealer.
)
],