Printing Pictures By Directly Connecting To The Printer (Pictbridge) - Panasonic NV-GS230 Operating Instructions Manual

VQT1D15ENG.book 42 ページ ２００６年１０月３０日 月曜日 午後８時２３分
Printing pictures by directly
connecting to the printer (PictBridge)
To print pictures by directly connecting the movie
camera to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
≥Insert a card and set to Picture Playback
Mode.
1
Connect the movie camera and the printer
with the supplied USB cable.
1 USB cable
PictBridge
≥The [PictBridge] indication appears on the
screen of the movie camera.
(When the printer is being recognized, the
[PictBridge] indication blinks.)
≥When no card is inserted in the movie camera,
the [PictBridge] indication does not appear.
(You cannot print any pictures.)
≥When the movie camera and the printer are not
connected properly, the [PictBridge] indication
keeps blinking. (It will blink for over approx.
1 minute.) Connect the cable or check the
printer.
≥We recommend using the AC adaptor as the
power supply.
≥When images are displayed in multi-screen,
they cannot be printed.
2
Select [SINGLE PRINT] or [DPOF PRINT].
≥If there is no file with a DPOF setting, you
cannot select [DPOF PRINT].
≥When you select [DPOF PRINT] for printing,
set the number of prints in DPOF setting.
≥When [DPOF PRINT] is selected, print after
you determine the paper size.
42
VQT1D15
Edit mode
3
Move the joystick left and right to select a
desired picture, and then press it.
4
Select the desired number of prints.
≥You can set up to 9 prints.
5
Select the setting for date printing.
≥If the printer is not capable of date printing,
this setting is unavailable.
6
Select the paper size.
[STANDARD]:
[4a5 INCH]
[5a7 INCH]
[4a6 INCH]
[A4]
≥You cannot set paper sizes not supported on
the printer.
7
Set [PRINT] >> [YES] to start printing.
1
ª When you stop printing halfway
Move the joystick down.
≥Avoid the following operations during printing.
These operations disable proper printing.
≥Disconnecting the USB cable
≥Removing the card
≥Switching the mode dial
≥Turning off the power
≥Check the settings for the paper size, quality of
print, etc. on the printer.
≥You cannot print pictures that cannot be played
on the movie camera.
≥When the movie camera and the printer are
connected in the Tape Recording/Playback
Mode, the [
may appear on the LCD monitor. However,
pictures cannot be printed.
Size specific to the printer
WEB] or the [ WEB] Indication