Other External Components; View Camera - Kenwood DNR1008RVS Instruction Manual

Other External Components

View Camera

NOTE
• To connect a camera, see Connecting the
camera (P.101).
• To use a rear view camera, a REVERSE lead
connection is required. (P.97)
• If [Rear Camera Interruption] is active, the
camera screen is displayed when you shift the
gear to the reverse (R) position.
• The camera whose view was displayed last is kept
and the same camera view will be displayed the
next time. If its assignment setting is changed, the
rear camera view is displayed.
• Rear/front camera interruption screen is not kept
as the camera screen which will be displayed the
next time.
Ñ
Display the camera screen
1
Press the [MENU]/[ATT] button.
h Popup menu appears. h
2
Touch [Camera].
h View camera screen appears. h
3
Adjust each item as follows.
3
Camera Switching Keys *
1
Touch to switch the view camera. It is
necessary to set "Camera Assignment
Settings" beforehand except "Rear". See To
set up the camera assignment settings
(P.64).
1
4
2
1
Other External Components
Camera off
2
Touch to exit the camera screen.
Switching the Guideline *
3
Touching each time turns on or off the
guideline.
Switching the Angle *
4
Touching each time changes camera angles.
*1 When two or more cameras of rear, front,
dashboard, left, right, and 3rd are connected
with this unit.
*2 Only when the rear camera screen is
displayed and CMOS-3xx series is connected
with this unit as the rear camera.
Ñ
Camera Setup
1
Press the [ ][HOME] button.
2
Touch [ ].
3
Touch [SETUP].
h SETUP Menu screen appears. h
4
Touch [Camera].
h Camera setting menu appears. h
5
Set each item as follows.
Camera Assignment Settings
■
Set up the camera assignment. See To set up
the camera assignment settings (P.64).
[Rear Camera Interruption]
■
[ON] ](Default): Displays the picture from the
rear view camera when you shift the gear
to the reverse (R) position.
[OFF]: Select this when no camera is
connected.
2
2
63
English