Other External Components; View Camera - Kenwood DNX775RVS Instruction Manual

Other External Components

Other External Components

View Camera

NOTE
• To connect a camera, see P.89.
• To use a rear view camera, a REVERSE lead
connection is required. (P.88)
• The view of the front view camera or dashboard
camera varies depending on the setting of
[Dashboard Camera /Front Camera].
• If [Rear Camera Interruption] is set to on, the
camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ
Display the camera screen
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [Camera].
h View camera screen appears. h
3
Adjust each item as follows.
To erase the caution message, touch the
screen.
3
Switching the View Camera
1
Touch to change the front view camera or
dashboard camera and rear view camera.
Camera off
2
Touch to exit the camera screen.
Switching the Guideline *
3
Touching each time turns on or off the
guideline.
66
1
4
2
1
Switching the Angle *
4
Touching each time changes camera angles.
*1 Available when [Dashboard Camera /Front
Camera], [Rear Camera] is set to [CMOS
3-Series Camera].
Ñ
Camera Setup
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP Menu screen appears.
h
3
Touch [Camera].
h Camera screen appears.
h
4
Set each item as follows.
[Rear Camera]
■
[CMOS 3-Series Camera]: Select this when
the CMOS-3xx series with ID 1 ("Rear
Camera") set is connected. ([Rear Camera
Interruption] turns on.)
[Other ](Default): Select this when the other
camera is connected.
[Rear Camera Interruption]
■
[ON]: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF ](Default): Select this when no camera is
connected.
[Rear Camera Settings]
■
If you select [CMOS 3-Series Camera] for
[Rear Camera], adjusts the CMOS-3xx series
with ID 1 ("Rear Camera") set. For details, see
the instruction manual of your camera.
[Parking Guidelines]
■
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
[Guidelines SETUP]
■
If you select [ON] for [Parking Guidelines],
adjust the parking guidelines. See To adjust
the parking guidelines (P.67).
1