Page 2 Record the serial number, found on the top of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Page 3 Important Notice on Software JVCKENWOOD Corporation, the original (English) of the license is presented. Ñ Software License on This EULA Product Ñ Software License Agreement The software embedded in this product comprises a number of independent software JVCKENWOOD Corporation (hereinafter called components, each of which is copyrighted by “Licensor”) holds either the copyright to the JVCKENWOOD Corporation or by a third party.
Page 4 Article 3 (Terms of License) Article 8 (Cancellation of the Agreement) Licensor reserves the right to cancel this 1. In assigning this product, User may not retain agreement forthwith and claim compensation the original copy of the embedded Licensed from User for the damages caused by such Software (including associated literature, cancellation when User: updates and upgrades) and any duplicates...
Page 5 (such as coins or metallic tools) inside the unit. About this Unit ............40 • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your KENWOOD dealer.
Page 6 See System Setup (P.73) For best results while pairing with your in the Instruction Manual. KENWOOD receiver, please be sure to close any unused applications. • The Radio Broadcast Data System feature won’t work in areas where the service is not Safety Precautions and supported by any broadcasting station.
Page 7 Before Use Ñ IMPORTANT INFORMATION The navigation system will not display the correct current position of the vehicle the first Vehicle Battery Preservation time it is used after purchase, or if the vehicle battery is disconnected. GPS satellite signals This navigation system can be used when the will soon be received, however, and the correct ignition key is turned to ON or ACC.
Page 8 Basic Operations Basic Operations Functions of the Buttons on the Front Panel Number Name Motion Remote • Receives the remote control signal. Sensor • Displays the HOME screen (P.11). [ ]HOME • Pressing for 1 second turns the power off. •...
Page 9 Basic Operations Number Name Motion SD card slot • A slot to insert an SD card. • You can play audio/visual files in the card. * • An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system.
Page 10 Instruction Manual. [OEM SETUP] ■ Set each item as follows. This function requires a commercial adaptor. Consult your KENWOOD dealer for details. Touch [Finish]. NOTE • These settings can be made from the SETUP menu. See Setup (P.68) in the Instruction Manual.
Page 11 Basic Operations Date and clock settings Touch screen operations To perform operations on the screen, you need Press the [ ][HOME] button. to touch, touch and hold, flick or swipe to select an item, display a setting menu screen Touch [ ]. or change pages.
Page 12 Basic Operations Display the HOME screen NOTE • The speed limit feature is for information only and does not replace your responsibility to abide Press the [ ][HOME] button. by all posted speed limit signs and to use safe driving judgment at all times. •...
Page 13 Basic Operations Popup menu Source selection screen description Press the [MENU]/[ATT] button. You can display icons of all playback sources h Popup menu appears. and options on the source selection screen. Touch to display the popup menu. The contents of the menu are as follows. •...
Page 14 Basic Operations Put the unit in standby • Switches to the Wireless Mirroring screen from the connected Android™ smartphone. Press the [ ][HOME] button. • Switches to the Radio broadcast. h HOME screen appears. (P.20) • Switches to the SiriusXM® satellite radio Touch [ broadcast.
Page 15 Basic Operations Source control screen List screen description There are some common function keys in the list screens of most sources. There are some functions which can be performed from most screens. Display the list screen Touch [1]. h The list screen appears. Displays the source selection screen.
Page 16 Basic Operations Navigation Operation # WARNINGS • Entering your vehicle profile characteristics For details on the navigation function, please does not guarantee that your vehicle's refer to the Navigation Instruction Manual. characteristics will be accounted for in all Getting Started route suggestions or that you will receive the warning icons in all cases.
Page 17 Stops the currents route. system, download the latest version of the Owner’s Manual from https://manual. Displays traffic information on the route. kenwood.com/edition/im408/ Returns to the Main menu. Enter your destination and start the Data field. Touch to display a different data guidance.
Page 18 • You can receive INRIX traffic information and parking information by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed. For details, see “KENWOOD Traffic Powered By INRIX” application. English...
Page 19 USB/SD/iPod/iPhone USB/SD/iPod/iPhone Connecting a USB device Inserting the SD Connect the USB device with the USB Tilt the panel toward you manually. cable. (P.36) Press the [ ][HOME] button. Insert the SD card into the slot until it Touch [ clicks.
Page 20 USB/SD/iPod/iPhone Connect iPod/iPhone USB/SD/iPod Basic Operation Press the [ ][HOME] button. Preparation • With an iPhone compatible with Apple CarPlay, Touch [ turn off Apple CarPlay by operating the iPhone at functional setup before connecting iPhone. Touch [USB], [SD], or [iPod]. (P.12) For details of the setup method, contact the manufacturer of the terminal.
Page 21 Radio Radio Function panel Radio Basic Operation Touch the right side of the screen to display the function panel. Touch again to close the panel. To listen to the Radio source, touch [Radio] • [TI] (FM only) : Selects the traffic information icon on the source selection screen.
Page 22 SiriusXM® SiriusXM® Control screen SiriusXM® Basic Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio.
Page 23 Bluetooth Control Bluetooth Control Function panel Touch the right side of the screen to display the function panel. Touch again to close the panel. Register the Bluetooth device • [Direct Channel]: Touch and enter the desired number. It is necessary to register the Bluetooth audio •...
Page 24 Bluetooth Control Using the Hands-Free Unit Search for the unit (”DNR1008RVS”) from your smartphone/cell-phone. You can use the telephone function by Complete steps 7 to 9 within 30 seconds. connecting the Bluetooth telephone to this unit. Operate your smartphone/cell-phone NOTE according to the displayed messages.
Page 25 Bluetooth Control ● Select the smartphone/cell-phone to use NOTE When you connect two smartphones/cell- • You can sort the phone numbers in the list by last phones name or first name. For details, see Hands-Free 1) Touch [ ] to select the phone Setup (P.61) in the Instruction Manual.
Page 26 Controlling Audio Controlling Audio To end call While talking, touch [ You can adjust various settings such as audio Ñ Operations during a call balance or subwoofer level. Press the [ ][HOME] button. Touch [ ]. Touch [Audio]. ● Adjust the volume of your voice 1) Touch [Speech Quality].
Page 27 Connection/Installation Ñ Connection/Installation Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. This section is for the professional installer. Touch [EQ / SW Level]. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Touch the screen and set the Graphic Equalizer as desired.
Page 28 Connection/Installation • If the power is not turned ON (“There is an error in the speaker wiring. Please check the connections. ” is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may Cooling fan have been activated.
Page 29 Connection/Installation Ñ Supplied accessories for installation (Ø3 x 6 mm) (Black) Ñ (Black 1 m) Installation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ (3 m) terminal of the battery. 2) Remove the vehicle parts for installing the unit and connecting wires to terminal.
Page 30 Connection/Installation Installing the unit Ñ Confirm the installing position of the display unit ● Vehicles cannot be installed It may be possible to install if it can avoid the following by adjustment for slider position and display height. Lever operations are interfered A hazard switch is hidden from a The display unit hits a panel on the such as shift lever, wiper lever,...
Page 31 Connection/Installation Ñ Positioning the slider in Install the bracket for forward position (accessory 0) each side so that its forward projections are aligned with the slots on the main unit. Remove the four screws from the bottom of the main unit. Screw Projection Projection...
Page 32 Connection/Installation Ñ Ñ Adjusting the display height GPS antenna GPS antenna is installed inside of the car. It Remove the four flat head screws from should be installed as horizontally as possible both sides. to allow easy reception of the GPS satellite signals.
Page 33 Connection/Installation Ñ Microphone unit Install the main unit to the vehicle. 1) Check the installation position of the Reinstall the removed parts such as a microphone (accessory 3). panel on the vehicle. 2) Clean the installation surface. 3) Remove the separator of the microphone Panel on the (accessory 3), and stick the microphone to vehicle...
Page 34 Connection/Installation Attach the protective cover (accessory =) to coupling part, and then fix it with two binding head screws (accessory ~). NOTE • If the protective cover (accessory =) is not attached, this unit will not turn on. Even if the unit is turned on, the power may be turned off halfway.
Page 35 Connection/Installation Ñ Connecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Green/Black Connect to the vehicle’s Accessory 1 parking brake detection switch harness.
Page 36 Connection/Installation Ñ Ñ 3-way speaker system setup Connecting the system and external components Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Preout RCA Cable (Sold separately) Power amplifier...
Page 37 Connection/Installation Ñ Connecting a USB device HDMI input Use HDMI cable. Accessory 2 (1 m) When you connect the cable to HDMI terminal, remove the fixture. After connecting the cable, USB device put the fixture again. Fixture USB terminal HDMI connector W: 20.6 mm or less H: 10.0 mm or less D: 29.2 mm or less...
Page 38 Connection/Installation Ñ Ñ Connecting an iPod/iPhone Connecting an Android smartphone Lightning Digital AV KCA-iP103 (0.8 m) Adapter Android smartphone USB cable iPod/iPhone HDMI cable KCA-iP103 (0.8 m) Accessory 2 (1 m) Accessory 2 (1 m) USB terminal USB terminal USB maximum power supply current : iPhone (with Apple CarPlay) DC 5 V = 1.5 A KCA-iP103 (0.8 m)
Page 39 Connection/Installation Ñ Connecting the camera Optional accessory Sold separately Left side view camera and Up to 3 cameras of Dashboard camera, Front Right side view camera view camera, Left side view camera and Right Front view camera [4] [6] side view camera can be connected. (P.39) CMOS-3xx series (optional accessory) or commercially available camera.
Page 40 Appendix Ñ Appendix To set up the camera assignment settings Press the [ ][HOME] button. Note for specifications Touch [ ]. ■ Bluetooth section Touch [SETUP]. Frequency h SETUP Menu screen appears. : 2.402 – 2.480 GHz Touch [Camera]. ■ General h Camera setting menu appears.
Page 41 Appendix About this Unit • Wi-Fi® is a registered trademark of Wi-Fi Alliance®. • The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. ■ Copyrights • Copyright© 2022 Techpoint, Inc. All rights reserved. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Page 42 Appendix VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD – Neither the name of the Xiph.org Foundation (“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO nor the names of its contributors may be used to THAT WAS ENCODED BY A CONSUMER ENGAGED endorse or promote products derived from this IN A PERSONAL AND NON-COMMERCIAL ACTIVITY software without specific prior written permission.
Page 43 KENWOOD al final de la vida útil (aplicable a los Products: GPS NAVIGATION SYSTEM países que hayan adoptado sistemas Model Name: DNR1008RVS independientes de recogida de Responsible Party: JVCKENWOOD USA CORPORATION residuos) 4001 Worsham Avenue, Long Beach, CA 90808, U.S.A.
Page 44 The product with the Hi-Res Audio logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. The logo is used under license from Japan Audio Society.
Page 45 Record the serial number, found on the top of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Page 46 Important Notice on Software JVCKENWOOD Corporation, the original (English) of the license is presented. Ñ EULA Software License on This Product Ñ Software License Agreement The software embedded in this product comprises a number of independent software JVCKENWOOD Corporation (hereinafter called components, each of which is copyrighted by “Licensor”) holds either the copyright to the JVCKENWOOD Corporation or by a third party.
Page 47 Article 3 (Terms of License) Article 8 (Cancellation of the Agreement) Licensor reserves the right to cancel this 1. In assigning this product, User may not retain agreement forthwith and claim compensation the original copy of the embedded Licensed from User for the damages caused by such Software (including associated literature, cancellation when User: updates and upgrades) and any duplicates...
Page 48 Contents Before Use USB/SD Precautions ..............6 Connecting a USB device ........29 Safety Precautions Inserting the SD ............29 and Important Information ....... 7 USB/SD Basic Operation.........30 How to read this manual ......... 8 Search Operation ............31 Basic Operations iPod/iPhone Functions of the Buttons on the Front Panel ... 9 Preparation ..............33 Turning on the Unit ..........10 iPod/iPhone Basic Operation .......34...
Page 49 Bluetooth Control Remote control Information for using Bluetooth® devices ..51 Battery Installation ...........86 Register the Bluetooth device ......52 Functions of the Remote control Buttons ..86 Playing the Bluetooth Audio Device ....54 Connection/Installation Using the Hands-Free Unit ........56 Hands-Free Setup .............61 Before Installation ............89 Installing the unit .............92 Other External Components...
Page 50 See System Setup For best results while pairing with your (P.73). KENWOOD receiver, please be sure to close any • The Radio Broadcast Data System feature unused applications. won’t work in areas where the service is not supported by any broadcasting station.
Page 51 The navigation system is designed to provide and follow the instructions in this manual. you with route suggestions. It does not reflect Neither KENWOOD nor Garmin shall be liable for road closures or road conditions, weather problems or accidents resulting from failure to conditions, or other factors that may affect safety observe the instructions in this manual.
Page 52 Before Use How to read this manual • The screens and panels shown in this manual are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual screens or panels, or some display patterns may be different from the actual ones.
Page 53 Basic Operations Basic Operations Functions of the Buttons on the Front Panel Number Name Motion Remote • Receives the remote control signal. Sensor • Displays the HOME screen (P.13). [ ]HOME • Pressing for 1 second turns the power off. •...
Page 54 Basic Operations Number Name Motion SD card slot • A slot to insert an SD card. • You can play audio/visual files in the card. * • An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system.
Page 55 Perform this setup when you use this unit first time. [OEM SETUP] ■ This function requires a commercial adaptor. Set each item as follows. Consult your KENWOOD dealer for details. Touch [Finish]. ■ [Locale] Select the country for the navigation system. The language, the distance unit, and the NOTE gasoline unit are set.
Page 56 Basic Operations Adjusting the volume [Time Format] ■ Select the time display format. [12-Hour] (Default)/[24-Hour] You can adjust the volume (0 to 40). Turn the knob clockwise to increase, and ■ [Clock] counter-clockwise to decrease. [NAV-SYNC ](Default): Synchronizes the clock time with navigation GPS data.
Page 57 Basic Operations Display the HOME screen NOTE • The speed limit feature is for information only and does not replace your responsibility to abide Press the [ ][HOME] button. by all posted speed limit signs and to use safe driving judgment at all times. •...
Page 58 Basic Operations Select the playback source • Close the popup menu. • Short-cut source icons: The source Press the [ ][HOME] button. changes to the one you have set with h HOME screen appears. a short-cut. For the short-cut setting, refer to Customize Short-cut source Touch [ icons on HOME screen (P.15).
Page 59 Basic Operations Customize Short-cut source icons *1 When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or on HOME screen Android Auto. If Apple CarPlay or Android Auto are connected during talking by the Bluetooth device or You can arrange the positions of the source iDatalink phone, the current call will be continued.
Page 60 Basic Operations Source control screen * For right hand drive vehicles, the left and right drawers are swapped. For how to set up the description driving position, see User Interface Setup (P.72). There are some functions which can be performed from most screens. List screen There are some common function keys in the list screens of most sources.
Page 61 Basic Operations Select Transportation Mode. etc. Keys with various functions are displayed here. • : Plays all tracks in the folder containing the current track. • : Jumps to the letter you entered (alphabetical search). • : Moves to the upper hierarchy level.
Page 62 • For more information about your navigation system, download the latest version of the Owner’s Manual from https://manual. Views the Next Turn page or the junction kenwood.com/edition/im408/ view page, when available. Views the Turn List page. Views the Where Am I? page.
Page 63 Basic Operations For details, see “KENWOOD Traffic Powered By Returns to the Main menu. INRIX” application. Data field. Touch to display a different data field. ■ Updating maps You can purchase updated map data from Vehicle speed. Touch to display a trip information.
Page 64 Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed to this unit. Preparation • Install the latest version of the KENWOOD Traffic Powered By INRIX application on your iPhone or Android smartphone. – iPhone: Search for "KENWOOD Traffic Powered By INRIX"...
Page 65 Basic Operations ● Displaying INRIX traffic information 1 While navigating a route, touch [ 2 Touch [Traffic]. ● Displaying parking information 1 While navigating a route, touch [ 2 Touch [Apps]. 3 Touch [Dynamic Parking]. English...
Page 66 Widget Widget Widget Drive Widget Panel You can change the widget. Press the [ ][HOME] button. Press the [[ ][HOME] button. You can change the widget or customize the widget area. Touch the right top corner of the drive widget panel. h The drive widget list appears.
Page 67 See Photo Frame Widget (P.22) and To register an original image (P.72). Drag the drive widget to right or left. Preparation • Install the latest version of the “KENWOOD Portal APP” application on your iPhone or Android smartphone. – iPhone: Search for “KENWOOD Portal APP” in the Apple App Store to find and install the most current version.
Page 68 • iPhone 6s activate the Wireless Mirroring function, • iPhone 11 Pro then connect to this unit. • iPhone 11 Select (”DNR1008RVS”) as the network Ñ to use. Connecting an iPhone h When the connection is established, then the same screen displayed on the Wired connection Android smartphone is displayed.
Page 69 APPS Ñ Select an Apple CarPlay device Wireless connection You can select the iPhone registered in [Device If two or more iPhone compatible with Apple List] and use it as the Apple CarPlay device. CarPlay have been registered, select the See Register the Bluetooth device (P.52).
Page 70 APPS Ñ Use Siri Android Auto™ Operation You can activate Siri. Android Auto enables you to use the functions Press the [VOICE] button. of your Android smartphone convenient for driving. You can easily make calls, listen to music, and access convenient functions on the Android smartphone while driving.
Page 71 APPS Ñ Ñ Connect Android smartphone Select an Android smartphone If two or more Android smartphones Wired connection have been registered, select the Android smartphone to be used as the Android Auto Connect an Android smartphone via the source. See Switch the connected device USB terminal.
Page 72 APPS Ñ Using voice control Press the [VOICE] button. Start speaking. NOTE • When you press and hold the [VOICE] button while inputting voice, you can start over from the beginning. To cancel Press the [VOICE] button. Ñ Switch to the Android Auto screen while listening to another source Press the [...
Page 73 USB/SD USB/SD Connecting a USB device Inserting the SD Connect the USB device with the USB Tilt the panel toward you manually. cable. (P.99) Press the [ ][HOME] button. Insert the SD card into the slot until it Touch [ clicks.
Page 74 USB/SD USB/SD Basic Operation • [ ] : Repeats the current track/folder. Each time you touch the key, repeat modes are switched in the following sequence: Most functions can be controlled from the File repeat ( ), Folder repeat ( ), Repeat source control screen and playback screen.
Page 75 USB/SD Search Operation Video screen You can search music or video files by the following operations. Touch [1]. Touch [S]. File search area (Video file only) Touch to search for the next/previous file. Select a list type. Key display area (Video file only) Touch to display the control screen.
Page 76 USB/SD Ñ Link search (Audio file only) You can search for a file of the same artist/ album/genre as that in the current track. Touch [Link Search]. Touch the desired tag type. You can select from artists, albums and genres. h The list corresponding to your selection appears.
Page 77 Apple CarPlay by operating the iPhone • Latest compatible list of iPod/iPhone. For details, at functional setup before connecting iPhone. see www.kenwood.com/cs/ce/ipod/. For details of the setup method, contact the • By connecting your iPod/iPhone to this unit with manufacturer of the terminal.
Page 78 iPod/iPhone iPod/iPhone Basic Operation Content list • Touch the left side of the screen to display the Content list. Touch again to close the list. NOTE • Displays the playing list. When you touch a • Set the remote controller mode switch to AUD track/file name on the list, playback will start.
Page 79 iPod/iPhone Ñ Search Operation Link search You can search for a file of the same artist/ You can search music files by the following album/genre/composer as that in the current operations. track. Touch [1]. Touch [Link Search]. Touch [S]. Touch the desired tag type. You can select from artists, albums, genres and composers.
Page 80 Radio Radio Radio Basic Operation Operation keys • [E] [F] : Tunes in a station. The method of Most functions can be controlled from the switching frequencies can be changed (see source control screen. Seek mode). To listen to the Radio source, touch [Radio] •...
Page 81 Radio Memory Operation Information display • Displays the information on the current station: Ñ Auto memory Frequency Touching [ ] allows you to switch between You can store stations with good reception in Content A, Content B. the memory automatically. Content A: PS name, Radio Text, Title&Artist Touch desired band key.
Page 82 Radio Selecting Operation Traffic Information (FM only) Ñ You can listen to and watch traffic information Preset select automatically when a traffic bulletin starts. You can list and select memorized stations. However, this feature requires a Radio Broadcast Data System that includes TI Touch [ ] on the left side of the screen.
Page 83 SiriusXM® SiriusXM® Control screen SiriusXM® Basic Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio.
Page 84 SiriusXM® For SXV200 or SXV100 * Information display Turns the Traffic & Weather Jump function • Displays the information on the current on or off. channel: Channel Name • (White) : Function on. P#: Preset number • (Purple) : Playing. #CH: Channel number •...
Page 85 SiriusXM® Storing Channels in Preset Direct search Memory You can tune in a channel directly. You can store the current channel in memory. Touch [ ] on the right side of the screen. Touch [Direct Channel]. Tune in the channel you wish to store in the memory.
Page 86 SiriusXM® Category/Channel search Replay You can specify the desired category and You can replay the last 60 minutes of the select a channel. program from the current channel. Touch [1]. Touch [Replay] on the function panel. Select a category. ■ [E] [F] Press to skip to the previous/next track.
Page 87 SiriusXM® TuneScan™ To return to live music/content Touch [ ] on the right side of the screen. TuneScan™ is a feature that plays samples from the starts of multiple buffered songs Touch [Live]. from each of the SmartFavorites channels that predominantly play music selections.
Page 88 SiriusXM® Traffic & Weather Now™ Content Alerts Traffic & Weather Now™ allows you to access When a broadcast program related to the the latest report whenever you want to hear registered artist, song or team starts, an Alert it. First select your city in the set up menu. See Content List screen appears to allow you to Select a City for Traffic &...
Page 89 SiriusXM® SportsFlash™ SiriusXM SETUP SportsFlash™ will notify you when a big play Touch [ ] on the right side of the screen. happens during a game with one of your Touch [SETUP]. favorite sports teams. Choose to tune in and hear the play unfold like it was live.
Page 90 SiriusXM® Ñ Ñ Parental code Parental Control You can set a SiriusXM parental code for Parental Control is a feature that provides the Parental Control. user with the ability to prevent unauthorized access to mature content and user selected Touch [Parental Code] on the SiriusXM channels.
Page 91 SiriusXM® Touch each channel in the list and set to NOTE ON or OFF. • Touch [All-Channels] to display all channels. • To delete the parental lock channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. Touch each channel on the list and set to ON or OFF.
Page 92 SiriusXM® Touch each content list item you want to To select a Team check or uncheck. Get alerted when your favorite sports team is playing on another SiriusXM channel with GameAlert™ Touch [My Games]. NOTE • You can select (þ) up to 60 artists or songs. Touch the desired league in the list.
Page 93 SiriusXM® Ñ SportsFlash™ setup Touch [ ] twice. Activating SportsFlash Touch [SportsFlash] on the SiriusXM SETUP screen. h SportsFlash is turned on or off. Default is “ON”. Selecting SportsFlash Beep Touch [SportsFlash Beep] on the SiriusXM SETUP screen. ■ [Edit] h SportsFlash Beep is turned on or off.
Page 94 SiriusXM® Ñ Selecting Featured Bands Touch [Done]. Update Messages You can set whether to be notified when the featured seasonal theme is updated. Touch [Featured Bands Update Messages] on the SiriusXM SETUP screen. Featured Bands Update Messages is turned on or off. Ñ...
Page 95 Bluetooth Control Bluetooth Control Ñ Using the Bluetooth function allows you to use About the smartphone/cell- various functions such as listening to the audio phone and Bluetooth audio file and making/receiving a call. device Information for using This unit conforms to the following Bluetooth specifications: Bluetooth®...
Page 96 [VOICE] button displays h SETUP Menu screen appears. Bluetooth pairing waiting dialog. Touch [Connections & AV]. Search for the unit (”DNR1008RVS”) from your smartphone/cell-phone. Complete steps 7 to 9 within 30 seconds. Operate your smartphone/cell-phone according to the displayed messages.
Page 97 Bluetooth Control Touch [Yes]. NOTE When data transmission and connection • If the icon is lighted, it means that the unit will have completed, the Bluetooth connection use that device. icon appears on the screen. • You can confirm the connection status of Bluetooth, Apple CarPlay or Android Auto as NOTE follows.
Page 98 Bluetooth Control Set each profile as follows. NOTE • The following devices are not deleted. – Wired Apple CarPlay device which is not paired – Connected Android Auto device Touch [Delete]. h Confirmation message appears. Touch [Yes]. h All the selected device(s) is deleted. [TEL (HFP) 1], [TEL (HFP) 2] ■...
Page 99 • : Device used normally. Bluetooth audio devices can be switched easily • : Device used for KENWOOD Music Mix to play music. See KENWOOD Music Mix (P.55). Touch [ ] (White/dark blue background) on the left of the name of the device to be played.
Page 100 Bluetooth Control Using the Hands-Free Unit NOTE • If a connected Bluetooth audio device is operated You can use the telephone function by to play music, connections are switched. connecting the Bluetooth telephone to this • When a Bluetooth source is switched to another unit.
Page 101 Bluetooth Control Select a dialing method. Call using call records Touch [ Select the phone number from the list. • [ ]: Call using call records • [ ]: Call using the phonebook • [ ]: Call using the preset number •...
Page 102 Bluetooth Control Select the phone number from the list. Call by entering a phone number Touch [ Enter a phone number with number keys. NOTE • You can sort the phone numbers in the list by last name or first name. For details, see Hands-Free Setup (P.61).
Page 103 Bluetooth Control Ñ Ñ Receive a call Operations during a call Touch [ ] to answer a phone call or ] to reject an incoming call. ● Adjust the volume of your voice 1) Touch [Speech Quality]. 2) Touch [T] or [U] for [Microphone Level]. NOTE •...
Page 104 Bluetooth Control Ñ Phone number preset ● Call-waiting When you receive a new call while talking on You can register frequently used phone the phone, you can answer the newly received numbers in this unit. call by touching [ ]. The current call is put on hold.
Page 105 Bluetooth Control Ñ Phonebook transfer Hands-Free Setup You can transfer phonebook data from your You can make various settings for the Hands- Bluetooth smartphone using PBAP. Free function. Touch [ Press the [ ][HOME] button. Touch [ Touch [ ]. Touch [SETUP].
Page 106 Bluetooth Control [Auto Response]* ■ Set the automatic response time to pick-up an incoming call. [OFF ](Default): Turns off the Automatic response function. [1]/[5]/[10]/[15]/[20]/[25]/[30]: Sets the ringing time (second). [Auto Pairing] ■ When set to “ON”, the Apple Auto Pairing function is turned on to automatically register the iPod touch or iPhone connected to this unit.
Page 107 Other External Components Other External Components View Camera Camera off Touch to exit the camera screen. Switching the Guideline * NOTE Touching each time turns on or off the • To connect a camera, see Connecting the guideline. camera (P.101). •...
Page 108 Other External Components Ñ To set up the camera [Rear Camera Message] * ■ [Always display] (Default): Always displays assignment settings the caution message on the rear camera interruption screen. Touch [Camera Assignment Settings] in [Clear after 5 seconds]: Displays the the Camera setting menu.
Page 109 Other External Components Adjusting the position of the selected *1 Except the [REAR VIEW CAMERA] setting mark. screen. *2 The [REAR VIEW CAMERA] setting screen only. *3 The [REAR VIEW CAMERA] and [FRONT VIEW CAMERA / DASH CAM] setting screens only. *4 The [FRONT VIEW CAMERA / DASH CAM] and [3rd VIEW CAMERA] setting screens only.
Page 110 Other External Components Ñ Ñ Display the dashboard camera Added function screen Display the map while playing the recorded file Press the [MENU]/[ATT] button. h Popup menu appears. Play the recorded file. See the instruction manual of the Touch [Camera]. Dashboard Camera.
Page 111 Other External Components HDMI source • Displays information about the Parking Distance Sensor of the vehicle. • Displays the control screen of the Connect your smartphone to the HDMI accessories in the vehicle. input terminal. (P.98) * These iDatalink features are displayed as the widget on the Home screen.
Page 112 Setup Setup Press the [ ][HOME] button. ■ [Backlight]/[Contrast]/[Black]/ [Brightness]/[Color]/[Tint] Touch [ ]. Adjust each setting. Touch [SETUP]. ■ [Aspect] Select a screen mode. [Full]: Changes the aspect ratio of video and displays video fully on the screen. [Normal]: Displays video at the ratio of 4:3. [Auto]: USB device and SD card: Displays video fully (vertically or horizontally) with no...
Page 113 Setup [Device List] [iPod Bluetooth Connection] ■ ■ See Select the method of making Select the connected device to be used. (P.53) connections for outputting sound from the iPod source (P.33). [Device Name] ■ If you select [ON] for [Bluetooth], you can [AV-IN Interface] ■...
Page 114 Setup Ñ Change the device name for Input the device name. bluetooth Touch [Device Name] in the Connections & AV setting menu. h Change Device Name screen appears. Touch and hold [ Input the device name. Touch [Enter]. Display & Button Setup Press the [ ][HOME] button.
Page 115 Setup To register an original color [Button Illumination Color] ■ You can set the button illumination color. You can register your original color. (P.71) Touch [User] on the Button Illumination [Wallpaper Customize] ■ Color screen. You can change the wallpaper image or color.
Page 116 [Dyn.] (Default): Displays information when the sensor detects obstacles. To register an original image [OFF]: Cancels this function. With “KENWOOD Portal APP” application This can be set when the iDatalink installed on your iPhone or Android (commercially available) is connected.
Page 117 Setup System Setup * If you select [Advanced] for Language Select Mode, the following screen appears. You can setup system parameters. Press the [ ][HOME] button. Touch [ ]. Touch [SETUP]. h SETUP Menu screen appears. Touch [System]. h System setting menu appears. [GUI Language Select] ■...
Page 118 Controlling Audio Controlling Audio You can adjust various settings such as audio 3-way speaker system setup balance or subwoofer level. Select the appropriate crossover network Press the [ ][HOME] button. mode for the speaker system used (2-way or Touch [ ]. 3-way speaker system).
Page 119 Controlling Audio Touch the speaker (1) you wish to adjust NOTE and set each parameter (2) as follows. • When the 3-way speaker system is selected, the following functions are disabled. – Front focus of Listening Position / DTA – Fader for Controlling General Audio –...
Page 120 Controlling Audio Equalizer Control When Speaker network is set to 3-way: You can adjust equalizer by selecting the optimized setting for each category. Press the [ ][HOME] button. Touch [ ]. Touch [Audio]. h Audio screen appears. ■ [Speaker] Touch [EQ / SW Level]. You can select a speaker type and its size to get the best sound effects.
Page 121 Controlling Audio Ñ Save the EQ curve Listening Position / DTA Adjust the EQ curve. Listening Position / DTA allows you to improve the sound field depending on the position of Touch [Memory]. the seat you sit. Listening Position / DTA allows you to set Select where to save.
Page 122 Controlling Audio Ñ Front Focus Position DTA control You can fine-adjust your listening position. You can focus the imaginary sound image on the front of the selected seat. Touch [Adjust]. Touch [Front Focus] in the Position / DTA Touch [Delay]. screen.
Page 123 Controlling Audio Fader / Balance / Zone Control [Size of the Virtual Sound Field] ■ Adjust the size of sound image to meet your taste. If the sound image is shifted from the Press the [ ][HOME] button. front, move it back by [Sound Image LR (Front)] or [Sound Image LR (Rear)].
Page 124 Controlling Audio Ñ Zone Control NOTE You can select different sources for front and • When the rear source is switched, the audio source that is output at the AV OUTPUT terminal rear positions in the vehicle. is also switched to the same source. Touch [Dual Zone] on the FAD / BAL / •...
Page 125 Controlling Audio Volume Offset Set each parameter as follows. Finely adjust the volume of the current source to minimize the difference in volume between different sources. Press the [ ][HOME] button. Touch [ ]. Touch [Audio]. h Audio screen appears. [Bass Boost] ■...
Page 126 Controlling Audio Parametric Equalizer About Adjustments If there are unpleasant peaks, you can slide the peaking filter to the left or right and search In addition to the conventional Graphic the frequencies by ear. Studio engineers use Equalizer, this unit has a parametric equalizer, this method to make adjustments quickly and which allows you more precise adjustments.
Page 127 Controlling Audio ● High-Pass Filter ● Peaking Filter Passes signals with frequencies higher than The frequencies in the vicinity of a certain a certain frequency (fc: cutoff frequency) frequency (f0: center frequency) are and attenuates signals with frequencies boosted or attenuated. Use this in the lower than the cutoff frequency.
Page 128 Controlling Audio Ñ Adjust the Parametric Equalizer EQ point (blue/yellow): EQ points that are not currently being adjusted. Preparation Curve (orange): EQ curve of the speaker currently being adjusted. • Correct the value in “Listening Position” and “Front Focus” before adjusting the parametric equalizer. Curve (blue): Overall EQ curve.
Page 129 Controlling Audio Audio Setup memory When you have finished adjustments, save the results as a preset, and check the effects by switching presets or turning Audio Control settings can be memorized. the Parametric EQ [ON] and [OFF]. The memorized settings can be recalled at any time.
Page 130 Remote control Remote control This unit can be operated using the remote Functions of the Remote control KCA-RCDV340 (optional accessory). control Buttons # CAUTION Ñ Switch the operation mode • Put the remote control in a place where it will not move during braking or other operations.
Page 131 Remote control Ñ Ñ Direct search mode Basic Operation Using the remote control, you can jump directly to the desired channel by entering the number corresponding to the content. NOTE • This operation cannot be performed for the USB device and iPod. Press the [DIRECT] button several times until the desired content appears.
Page 132 Remote control Mode Function Name switch CLEAR − Not used. Switches to the direct search mode. (P.87). DIRECT − AUDIO − Not used. RETURN − Not used. SUBTITLE − Not used. − When a call comes in, answers the call. ANGLE −...
Page 133 Connection/Installation Connection/Installation This section is for the professional installer. • Do not use your own screws. Use only the screws provided. If you use the wrong screws, For safety’s sake, leave wiring and mounting to you could damage the unit. professionals.
Page 134 Connection/Installation ● Forward and Lateral Fields of Vision • This unit has the cooling fan to decrease the internal temperature. Do not mount the unit • To determine driver’s forward and lateral fields in a place where the cooling fan of the unit is of vision under normal conditions, place a blocked.
Page 135 Connection/Installation Ñ Installation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ (5.0 m) terminal of the battery. 2) Remove the vehicle parts for installing the unit and connecting wires to terminal. 3) Make the proper input and output wire connections for each unit.
Page 136 Connection/Installation Installing the unit Ñ Confirm the installing position of the display unit ● Vehicles cannot be installed It may be possible to install if it can avoid the following by adjustment for slider position and display height. Lever operations are interfered A hazard switch is hidden from a The display unit hits a panel on the such as shift lever, wiper lever,...
Page 137 Connection/Installation Ñ Positioning the slider in Install the bracket for forward position (accessory 0) each side so that its forward projections are aligned with the slots on the main unit. Remove the four screws from the bottom of the main unit. Projection Screw Projection...
Page 138 Connection/Installation Ñ Ñ Adjusting the display height GPS antenna GPS antenna is installed inside of the car. It Remove the four flat head screws from should be installed as horizontally as possible both sides. to allow easy reception of the GPS satellite signals.
Page 139 Connection/Installation Ñ Microphone unit Install the main unit to the vehicle. 1) Check the installation position of the Reinstall the removed parts such as a microphone (accessory 3). panel on the vehicle. 2) Clean the installation surface. 3) Remove the separator of the microphone Panel on the (accessory 3), and stick the microphone to vehicle...
Page 140 Connection/Installation Attach the protective cover (accessory =) to coupling part, and then fix it with two binding head screws (accessory ~). NOTE • If the protective cover (accessory =) is not attached, this unit will not turn on. Even if the unit is turned on, the power may be turned off halfway.
Page 141 Connection/Installation Ñ Connecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Green/Black Connect to the vehicle’s Accessory 1 parking brake detection switch harness.
Page 142 Connection/Installation Ñ Ñ 3-way speaker system setup Connecting the system and external components Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Preout RCA Cable (Sold separately) Power amplifier...
Page 143 Connection/Installation Ñ Connecting a USB device HDMI input Use HDMI cable. When you connect the cable to HDMI terminal, Accessory 2 (1 m) remove the fixture. After connecting the cable, put the fixture again. USB device Fixture HDMI connector USB terminal W: 20.6 mm or less H: 10.0 mm or less D: 29.2 mm or less...
Page 144 Connection/Installation Ñ Ñ Securing the USB extension Connecting an Android cable smartphone Android smartphone Secure the USB extension cable with insulating tape or the like so that its connectors are not USB cable disconnected. Accessory 2 (1 m) Ñ Connecting an iPod/iPhone USB terminal KCA-iP103 (0.8 m) Lightning Digital AV...
Page 145 Connection/Installation Ñ Connecting the camera Optional accessory Sold separately Left side view camera and Up to 3 cameras of Dashboard camera, Front Right side view camera view camera, Left side view camera and Right Front view camera side view camera can be connected. For [4] [6] more information, see To set up the camera assignment settings (P.64).
Page 146 Troubleshooting Troubleshooting Ñ Others Problems and Solutions The Touch Sensor Tone doesn’t sound. If any trouble occurs, first check the following The preout jack is being used. table for possible problems. † The Touch Sensor Tone cannot be output from the preout jack.
Page 147 † Turn the power off and on again. If the “Starting tuner failed. ” message does not disappear, contact † Wire or insulate the speaker cord as appropriate and turn the power off and on again. your nearest KENWOOD dealer. Hot Error Ñ SiriusXM When the internal temperature of this unit rises to 60°C...
Page 148 Troubleshooting Ñ Apple CarPlay The GPS antenna must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The GPS antenna is not connected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Device List].
Page 149 Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ About files The following audio and video files are supported. ■ Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG-2/MPEG-4 AAC LC 8 –...
Page 150 Appendix ■ Limitation on structure of file and folder USB device/SD Maximum number of folder layers Maximum number of files (per folder) Maximum number of folders (per folder) 9999 Maximum number of folders (per device) Unlimited • You can enter a folder name and file name with 255 or fewer single-byte characters. •...
Page 151 Appendix Specifications Audio Decoder : MP3 / WMA / AAC / WAV / FLAC / DSD / Vorbis Video Decoder ■ Monitor section : MPEG-1 / MPEG-2 / MPEG-4 / WMV / H.264 / MKV Picture Size : 10.1 inches (diagonal) wide ■...
Page 152 Appendix ■ HDMI section ■ FM tuner section HDMI Frequency Range (step) : Type-A : 87.9 MHz – 107.9 MHz (200 kHz) Input Resolution Usable Sensitivity (S/N : 30 dB) • VGA (640x480p @59.94Hz/60Hz) : 7.3 dBf (0.7 μV/75 Ω) •...
Page 153 Appendix ■ Audio section Maximum Power Output (Front & Rear) : 50 W × 4 Typical Power Output (Front & Rear) Full Bandwidth Power (at less than 1% THD) : 22 W × 4 Output frequency band : 20 – 88,000 Hz Preout Level (V) : 4 V/ 10 kΩ...
Page 154 Appendix About this Unit • Wi-Fi® is a registered trademark of Wi-Fi Alliance®. • The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. ■ Copyrights • Copyright© 2022 Techpoint, Inc. All rights reserved. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Page 155 Appendix VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD nor the names of its contributors may be used to (“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO endorse or promote products derived from this THAT WAS ENCODED BY A CONSUMER ENGAGED software without specific prior written permission.
Page 156 Products: GPS NAVIGATION SYSTEM – Connect the equipment into an outlet on a Model Name: DNR1008RVS circuit different from that to which the receiver Responsible Party: JVCKENWOOD USA is connected. CORPORATION – Consult the dealer or an experienced radio/TV 4001 Worsham Avenue, technician for help.
Page 157 Appendix ■ Información acerca de la eliminación ■ Informação sobre a eliminação de de equipos eléctricos y electrónicos pilhas al final de la vida útil (aplicable a los Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor países que hayan adoptado sistemas ou entidade autorizada para que a mesma seja independientes de recogida de...
Page 158 The product with the Hi-Res Audio logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. The logo is used under license from Japan Audio Society.
Page 160 INSTALLING, COPYING, OR OTHERWISE USING YOUR Software License Agreement NAVIGATION SOLUTION OR CONTENT CONSTITUTES YOUR BY USING THE DNR1008RVS, YOU AGREE TO BE BOUND ACKNOWLEDGMENT THAT YOU HAVE READ THIS LICENSE BY THE TERMS AND CONDITIONS OF THE FOLLOWING AGREEMENT AND AGREE TO ITS TERMS AND SOFTWARE LICENSE AGREEMENT.
Page 161 No Warranty. The Navigation Provider Products are provided to NOT EXCEED $1.00. Some States, Territories and Countries do you "as is," and you agree to use them at your own risk. The not allow certain liability exclusions or damages limitations, so to Navigation Provider and its licensors including the licensors, that extent the above may not apply to you.
Page 162 Data, as further set forth at https://legal.here.com/en-gb/terms 27.7202-1 (DOD policy on commercial computer software), FAR /general-content-supplier-terms-and-notices. 52.227-19 (JUN 1987) (commercial computer software clause for civilian agencies), DFARS 252.227-7015 (NOV 1995) (DOD Term. This Agreement is effective until such time as (i) if technical data - commercial items clause);...
Page 163 Table of Contents Starting a Route to a Saved Location ........5 Editing a Saved Location ..5 Getting Started ........ 1 Assigning Categories to a Saved Navigation System ......1 Location ........5 Status Bar Icons ......1 Navigation........5 Transportation Modes ....
Page 164: Table Of Contents
Viewing Traffic Alerts ....9 Entering Fuel Data ....14 Viewing Junctions ..... 9 Editing Fuel Logs ....14 Viewing the Trip Information IFTA Data Exports ....14 Page .......... 9 Customizing the Device ....14 Getting Directions to Your Current Adding Truck or RV Profiles ..
Page 165 WARNING screen. See the Safety Precautions and Important • Hold to quickly return to the main Information in the KENWOOD system menu. instruction manual for product warnings and • Select to see more choices. other important information.
Page 166 You can purchase updated map data from Finding a Location Using the Search Garmin ® 1 Go to www.garmin.com/kenwood. You can use the search bar to search for 2 Select PURCHASE MAP & TRAFFIC locations by entering a category, brand UPDATES.
Page 167 Changing the Search Area Finding a City 1 From the main menu, select Where To?. 1 Select Where To? > Categories > Cities. 2 Select Searching near:. 2 Select an option: 3 Select an option. • Select a city from the list of nearby Search Tools cities.
Page 168 Finding Parking Finding a Location Using Quick Search 1 Select Where To? > Categories > After you have performed a search for a Parking. point of interest, certain categories may 2 Select a parking location. display a Quick Search list that displays the last four destinations you selected.
Page 169 Setting a Simulated Location 6 Select an option: • Select Name. If you are indoors or not receiving satellite signals, you can use the GPS to set a • Select Phone Number. simulated location. • Select Categories to assign 1 Select Settings > Navigation > GPS categories to the saved location.
Page 170 Your Route on the Map Taking a Detour While navigating a route, you can use NOTICE detours to avoid obstacles ahead of you, The speed limit feature is for information such as construction zones. only and does not replace your responsibility While navigating, select >...
Page 171 About Exit Services Avoiding an Area 1 Select Settings > Navigation > Custom NOTE: You must be on a major highway or Avoidances. road to view exit services. Truck stops and weigh stations are available only when using 2 If necessary, select Add Avoidance. the truck transportation mode.
Page 172 3 Copy the custom POI files to the Garmin Layers. folder on the USB mass storage device. 2 Select the Trip Log check box. 4 On the KENWOOD system, open the 3 Select Save. navigation system. 5 Connect the USB mass storage device to your KENWOOD system.
Page 173: Viewing Traffic Alerts
Viewing Route Activity Changing the Map Data Field 1 From the map, select the data field in the Viewing a List of Turns lower left-hand corner. While navigating a route, you can view all of 2 Select a type of data to display. the turns and maneuvers for your entire 3 Select Save.
Page 174: Getting Directions To Your Current Location
About ecoRoute Resetting Trip Information ™ The ecoRoute feature calculates the fuel 1 From the map, select Speed. economy and the fuel price of navigating to 2 Select > Reset All. a destination, and offers tools for improving 3 Select an option: fuel efficiency.
Page 175: About Ecochallenge
1 Connect a USB mass storage device to vehicle fuel economy by scoring your driving your KENWOOD unit. habits. The higher your ecoChallenge 2 Select Apps > ecoRoute™ > Mileage scores, the more fuel you have saved.
Page 176: Navigating To A Saved Trip
Traffic data is storage device. not available in all areas or regions. Viewing Previous Routes and See the KENWOOD Traffic Powered By INRIX™ application for INRIX traffic Destinations subscription information. Before you can use this feature, you must...
Page 177: About The Traffic Icon
About the Traffic Icon 3 Select an item in the list. 4 If there is more than one delay, use the When you are receiving traffic information, a arrows to view additional delays. traffic icon appears on the map. The traffic icon changes color to indicate the severity of Viewing a Traffic Incident on the Map traffic conditions.
Page 178 After decisions. exporting, you should delete the IFTA data from your KENWOOD unit using the 1 Select Settings > Truck Profile. following method. 2 Select a profile type: Exporting a Jurisdiction •...
Page 179 Activating Truck or RV Profiles Auto Zoom: Automatically selects the zoom level for optimal use of your map. When Before you can activate a profile, you must disabled, you must zoom in or out add the profile (Adding Truck or RV manually.
Page 180 Settings > Language & Keyboard. Select Settings > Display. NOTE: To change the text language Color Mode: Allows the device to display settings, see the KENWOOD system day or night colors. instruction manual. Voice Language: Sets the language for voice prompts.
Page 181: Device And Privacy Settings
Appendix Device and Privacy Settings To open the Device settings page, from the Warning and Alert Symbols main menu, select Settings > Device. About: Displays the software version WARNING number, the unit ID number, and Entering your vehicle profile characteristics information on several other software does not guarantee that your vehicle's features.
Page 182: Road Condition Warnings
Road Condition Warnings Risk of grounding Lateral wind Narrow road Sharp curve Steep down hill Steep up hill Tree overhang Alerts Weigh station Road not verified for trucks Appendix...
Page 186 To download free navigation software updates and purchase updated maps for your product, go to www.garmin.com/kenwood. 190-02937-00_0B...

Kenwood DNR1008RVS Quick Start Manual

Quick Links

Related Manuals for Kenwood DNR1008RVS

Summary of Contents for Kenwood DNR1008RVS

Table of Contents