Resetting System Configuration Settings - Compaq PROLIANT ML350 Maintenance And Service Manual

Connectors, Switches, and LEDs

Resetting System Configuration Settings

It may be necessary at some time to clear and reset system configuration settings. When the
system configuration switch position 6 is set to the on position, the system is prepared to
erase all system configuration settings from both CMOS and nonvolatile RAM (NVRAM):
IMPORTANT: Clearing NVRAM deletes the configuration information. Refer to the Compaq ProLiant
ML350 Generation 3 Server Setup and Installation Guide for complete instructions on configuring the
server.
1. Power down the server.
2. Set the system configuration switch position 6 to the on position.
3. Power up the server. All configuration settings are now erased and all system operations
halt.
4. Power down the server.
5. Reset the position 6 switch to the default off position.
6. Power up the server.
7. Reset all system configuration settings.
Refer to Chapter 3 of this guide, "Diagnostic Tools," or refer to the Compaq ROM-Based
Setup Utility User Guide found on the server documentation CD for more information on
RBSU.
4-6
COMPAQ CONFIDENTIAL Codename: Steel Dragon Part Number: 278704-002 Last Saved On: 12/18/02 9:49 AM
Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide