Compaq PROLIANT ML350 Maintenance And Service Manual page 37

Generation 3 server

Hide thumbs Also See for PROLIANT ML350:

Table of Contents

6. Remove all drive blanks and hard drives. Refer to "Hot-Plug Hard Drive Blank" and

"Hot-Plug Hard Drive" earlier in this chapter.

7. Remove the four screws securing the drive cage to the chassis with a Torx T-15

screwdriver (1).

8. Pull the hot-plug hard drive cage out from the chassis (2).

Figure 2-20: Removing a hot-plug hard drive cage

To replace a hot-plug hard drive cage, reverse steps 2 through 8.

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

COMPAQ CONFIDENTIAL Codename: Steel Dragon 2.4 Part Number: 278704-002 Last Saved On: 12/18/02 9:43 AM

Removal and Replacement Procedures

2-23

Table of Contents