Compaq PROLIANT ML350 Maintenance And Service Manual page 64

Table 4-3: System Configuration Switch Settings
Switch Default Position
1 Off
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
Note: Switch positions 7 and 8 are reserved for Compaq authorized service providers only. Do not change the
specified default setting for these positions, unless instructed otherwise.
Table 4-4: System ID Switch Settings
Position
1
2
3
4
Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Steel Dragon Part Number: 278704-002 Last Saved On: 12/18/02 9:49 AM
Function Description
Reserved N/A
Lock configuration Enables or disables the
ability to write to
NVRAM to reconfigure
the system
Tower or rack Specifies a tower or
configuration rack configuration
Enable diskette Enables or disables
boot booting from the
diskette drive
Password disable Disables password
Clear CMOS and Clears system
NVRAM configuration settings
Reserved N/A
Reserved N/A
Default
Off
Off
Off
Off
Connectors, Switches, and LEDs
Settings
N/A
Off = Configuration may be
changed.
On = Configuration is locked and
cannot be changed.
Off = Tower configuration
On = Rack configuration
Off = Diskette drive boot is
controlled by the configuration.
On = Diskette boot is disabled.
Off = Password is enabled.
On = Password is disabled.
Off = Normal
On = When server is powered up,
all system configuration
information is erased.
N/A
N/A
Function/Description
Reserved
Reserved
Reserved
Reserved
4-5