Panasonic AG-DVX100B Setup page 14

4 . Camera Menus Screen
4.1 Scene File Screen
The Scene File Menu allows the user to quickly change the setup for up to six scenes with a
turn of the scene dial.
The scenes are tailored to various shooting conditions and are stored in the six menu
memories and are selected by a six position rotary dial (cine switch), located at the back of
the camcorder. You may also set up your own scene files instead of using the factory de-
faults.
Factory Defaults for
Items
DETAIL LEVEL
CHROMA LEVEL
CHROMA PHASE
COLOR TEMP
MASTER PED
A. IRIS LEV
GAMMA
SKIN TONE DTL
MATRIX
V DETAIL FREQ
PROGRSSIVE
The factory defaults are set up for six different scenes:
F1 : SCENE This file contains the settings suited for standard recording.
F2 : FLOU This file contains the settings suited for recording under fluorescent lights.
F3 : SPARK This file contains the settings suited to accentuating the subject while
recording (for shooting a wedding reception, etc.)
F4 : B-STR This file contains the settings suited for recording with extended
gradations in the dark areas (for recording scenes at dusk, etc.)
F5 : 24P This file contains the settings suited for recording in the progressive 24P
mode
F6: ADVANC This file contains settings suited for recording in progressive 24p
advanced mode.
Note: During recording, you can not change the scene file to progressive. You must be
in the record standby mode to change to the progressive mode.
Defaults for Scene File Dial
F1 F2 F3
——— FLOU. SPARK
0 0 + 5
0 + 2 + 3
0 0 0
0 0 0
0 0 -3
0 0 0
NORM NORM LOW
OFF OFF OFF
NORM NORM NORM
THICK THICK THICK
OFF OFF OFF
14
F4 F5
B-STR 24P
0 - 4
+ 3 0
0 0
0 0
- 1 -5
- 1 - 3
HIGH CINE-LIKE
OFF OFF
NORM CINE-LIKE
THICK THICK
OFF 24P
F6
ADVANC
0
0
0
0
-5
- 3
CINE-LIKE
OFF
CINE-LIKE
THIN
24P(Adv)