Operation - Fluke RSE30 User Manual

RSE30/RSE60/RSE30H/RSE60H
Users Manual
Item
Top mounting holes
A
Infrared lens
B
Interface for RS-485 communication, relay
C
and optocoupler
LAN communication interface
D
Reset button
E

Operation

The Camera and the Fluke SmartView IR software need a network connection to work properly. Set
up your network without interference from other systems. SmartView IR is a data-intensive
application. Use of other data-intensive applications (audio or video stream) on the PC or in the same
network system can cause loss of data.
All thermal cameras need sufficient warm-up time for accurate temperature
measurements and best image quality. Warm-up time can vary by model and
environmental conditions. Wait a minimum of 30 minutes for the most accurate
temperature measurement. When you move the camera between environments with
large differences in ambient temperature, allow for additional adjustment time.
4
9
Figure 2.
Table 2. Product features
Description
1
2
3
4
5
6
Product features
Item
Power input port
F
Functional earth
G
LED indicator
H
Tripod/accessory mounting holes
I
Note
7 8
Description