palmOne Tungsten E2 User Manual page 559

CHAPTER 25
Tip
It's a good idea to add at
least three commas
before your calling card
number to allow for the
cue delay. Each comma
delays transmission of
your calling card number
for two seconds.
Tungsten™ E2 Handheld
Customizing Your Handheld
Cont'd
. b. Enter any of the following settings, and then select OK:
Phone # Enter the phone number for your ISP or dial-in server.
Dial prefix Check the Dial prefix box, and then enter the number that you dial
before the telephone number to access an outside line. For example, many
offices require that you first dial 9 to dial a number outside the building.
Disable call waiting If your phone has Call Waiting, check the Disable call
waiting box, and then enter the code to disable Call Waiting. Call Waiting can
cause your session to end if you receive a call while you are connected. Contact
your local phone company for the code that is appropriate for you.
Use calling card If you want to use your calling card when dialing your ISP or
dial-in server, check the Use calling box to select it. Enter your calling card
number on the Use calling card line.
[ ! ]
IMPORTANT
number in the Phone # field and the phone number in the Use calling card field.
4
Select Done.
Done
Because MCI works differently, enter the MCI calling card
538