Palm Tungsten T2 Read This First Manual page 6

3
Set up
a. Remove the handheld from the cradle.
1. Tilt it forward.
b. Turn on the handheld by pressing the power
button.*
Power button
* Problems? See "Troubleshooting" section in the
upcoming pages.
2. Lift up.
Stylus
To remove it, gently
press the top of the
stylus to release it
from the slot. Then
pull it out of the slot.
c. Remove the stylus.
d. Follow the Setup instructions on the screen.
Center
e. Tap firmly the center of at least three
targets.