Connecting To Your Video Recorder; Switching On For The First Time - Topfield TRC-1400 User Reference

14 Setup

2.4.3 Connecting to your video recorder

2.5 Switching on for the first time
The digital receiver can also output video through an auxiliary
SCART connector to another device such as a video recorder.
Now that you have your digital receiver connected, you should
plug it into a wall socket. Ensure that your television set is
turned on and on the correct video channel so that you will be
able to see the display from the digital receiver.
Before switching on the digital receiver, you should insert bat-
teries into the remote control. Open the battery compartment
by removing the lid, and then insert the batteries observing the
polarity, which is marked on the base of the battery compart-
ment.
Press the button on the top left corner on the remote con-
trol. In a little time, you may see a picture displaying a menu.
If you do not see a picture, try pressing the
remote control. If after several tries you still get no picture,
check that the television is set to the correct input. If the picture
is good, you can skip to
and radio services. Otherwise, you may need to temporarily
connect the Composite video connector (VIDEO) to your tele-
vision set so that you can see the menu in order to configure
the video settings.
You need to obtain a SCART cable to link the
auxiliary SCART connector. Plug one end
of the cable into the VCR socket on the digi-
tal receiver, and plug the other end into the
matching socket on your video recorder or
suchlike.
§3.1 to search for available television
£
¢ ¡
button on the
VF