Replacing the LCD Module
1. Place the LCD module on the top assembly as shown on
LCD hinges are at a 90 degree angle to the LCD module and lie flat against the top
assembly.
CAUTION:
!
Make sure all cables and antennas are moved away from the device to avoid
damage during installation.
Figure 3-86. Replacing the LCD Module
2. Install and secure four (4) screws (F) to the LCD module
Figure 3-87. LCD Module Screw Location
3-68
F
Figure
3-86. Make sure the
(Figure
3-87).
F
Machine Maintenance Procedures
0