Replacing the Microphone Board
1. Place the microphone board (A) into its compartment on the LCD cover. Make sure
that the aperture on the microphone board is aligned with the stud (D) located on
the LCD cover
2. Connect the microphone cable (C) to the microphone connector and adhere the tape
(B) to secure the microphone cable (C) to the microphone board (A)
NOTE:
NOTE:
Use care not to damage the cable.
NOTE:
NOTE:
Make sure that the white-dot side of the microphone cable is facing up.
Figure 3-69. Replacing the Microphone Board
Machine Maintenance Procedures
(Figure
3-69).
B
A
D
C
0
(Figure
3-69).
3-53