USB Board Removal (For C732 & C732T only)
Prerequisite:
LCD Module Removal
1. Find the USB board (A) on the top assembly
A
Figure 3-22. USB Board Removal
2. Disconnect and remove the USB board high-speed FPC (D) from the mainboard
connector (E) and USB board connector (C)
3. Disconnect and remove the USB board low-speed FPC (G) from the mainboard
connector (H) and USB board connector (F)
4. Remove one (1) screws (I) securing the USB board in place
Figure 3-23. USB Board Removal
3-22
I
C
F
(Figure
3-22).
(Figure
3-23).
(Figure
3-23).
(Figure
D
G
Machine Maintenance Procedures
B
3-23).
E
H
0