Replacing The Wlan Board - Acer Aspire S3 MS2346 Service Manual

Replacing the WLAN Board

NOTE:
1. Place the WLAN board in its slot in the upper case.
2. Connect the WLAN & mini 1 cables (1) to the WLAN board, then press the connector latch
(2) until it locks into place.Connect the power cable to the WLAN board (3).
3-50
Downloaded from www.Manualslib.com
NOTE:
For models that have M-SATA board installed, please proceed to page 3-51,
the M-SATA Board.".
Figure 3-79. WLAN Board
Figure 3-80. WLAN, Mini 1 & Power Cables
manuals search engine
0
"Replacing
Machine Maintenance