Lens Disassembly Procedure - Panasonic LUMIX DMC-ZX3EB Service Manual

8.3.12. Removal of the Jack Door
8.3.13. Removal of the Battery Door Unit
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The Screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
(Fig.D15)
(Fig.D16)
8.4.

Lens Disassembly Procedure

Precaution:
1. Do not remove the CCD when disassembling or re-
assembling the lens in order to maintain it clean.
When remove it, refer to item "8.6.".
2. Keep dust or dirt away from the lens.
3. To remove dirt or dust from the lens, blow with dry air.
4. Do not touch the lens surface.
5. Apply grease (RFKZ0472) as shown on "THE APPLICA-
TION OF GREASE METHOD" in the figure.
6. Apply a light coat of grease using an object similar to a
toothpick.
7. The fixed frame unit, drive frame unit and penetration
cam frame should be replaced as a unit.
31