Table of Contents
Advertisement
9.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the CMOS Unit when disassembling or
reassembling the lens in order to maintain it clean.
When remove it, refer to item "9.6.".
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use Lens Cleaning Kit (VFK1900BK).
9.4.1.
Removal of the Zoom Motor and
Lens FPC Unit
1. Peel the FPC Tape A and FPC Tape B.
2. Unscrew the 2 screws (A).
3. Unscrew the screw (B).
4. Remove the Photo Sensor.
5. Disconnect 2 connectors.
6. Unlock the locking tab and remove connector portion.
7. Remove the 2 convexes.
8. Remove the 4 convexes.
9. Remove the Zoom Motor and Lens FPC Unit.
10. Unscrew the 2 screws (C).
11. Unsolder the 2 soldering points.
12. Remove the Lens FPC Unit from the Zoom Motor.
45
Advertisement
Table of Contents
