Installation - OWI AMPIC5 Installation Instructions Manual

IN-CEILING/WALL-MOUNT SPEAKERS
I N S T A L L A T I O N / O W N E R S' M A N U A L
MODEL IC5 / IC6 (NON-AMPLIFIED SPEAKERS)
SPEAKER SPECIFICATIONS:
DESCRIPTION:
COVERED OUTDOOR:
IMPEDANCE:
SENSITIVITY (1W/1M):
DISPERSION:
MAX POWER:
NOMINAL POWER:
FREQUENCY RESPONSE:
CROSSOVER:
WOOFER SIZE:
WOOFER MATERIAL:
TWEETER SIZE:
TWEETER MATERIAL:
GRILL MATERIAL:
DIMENSIONS:
CUT OUT SIZE:
WEIGHT:
MOUNTING HARDWARE:
PAINTABLE:

INSTALLATION:

Speaker Placement
Before installing your OWI speakers, consider the placement carefully, taking into effect the location of
electrical, plumbing and other fixtures.
Placement in Ceiling
OWI speakers should be ideally located above the primary listening area.
Placement in Wall
Optimum sound will be achieved when your OWI speakers are installed at ear level or slightly higher and the
listening area is no closer to the speakers than the distance between the speakers themselves.
Mounting your OWI Speakers
Determine the best area to mount your OWI speakers. It will be necessary to run your speaker wires to that
MODEL IC5
5.25" 2-way in-ceiling speaker
Yes
8 ohm
86dB 1w/M
140 deg
40 watts
20 watts
90Hz - 20KHz
6 dB/Octave
5.25"
Paper coated woofer with foam surround
0.5" (13mm) balance tweeter
Ferrite magnet with Mylar diaphragm
material
Aluminum
7.95" (202mm) Dia x 2.75" (70mm) mounting
depth
6.61" (168mm)
2.17 lbs (985 gms)
Clamps - 4 each
Yes
Page 13 of 16
MODEL IC6
6.5" 2-way in-ceiling speaker
Yes
8 ohm
87dB 1w/M
140 deg
50 watts
25 watts
65Hz-20KHz
6 dB/Octave
6.5"
Paper coated woofer with foam surround
0.5" (13mm) balance tweeter
Ferrite magnet with Mylar diaphragm
material
Aluminum
8.78" (223mm) Dia x 3.35" (85mm)
mounting depth
7.68" (195mm)
2.51 lbs. (1140 gms)
Clamps - 4 each
Yes
Filename:AMPIC5_6 MANUAL
07/18/08