IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operation instructions should be read before this OWI product is operated. 2. Keep these instructions - The safety and operating instructions should be kept for future reference.
Page 3
18. OWI recommends that this apparatus is to be placed on a switched power outlet, one that switches both sides of the line and has contact separation of at least 3mm.
Page 4
2. One (1) each UL Listed Power Supply Introduction: The AMP4IC6 is designed to provide a 6.5 inch speaker that is self powered allowing line input audio that is either balanced or unbalanced to provide the input signal. The power amplifier provides up to 25 watts of power.
2. Intermittent output: Check for shorted output causing the amplifier to into and output protection. Check each input wire for loose screws. 3. Distortion: Do not power more than one AMP4IC6 on one power supply. While it will work, it will cause distortion.
Page 6
Having many of the recent most popular installer features, the AMP4IC6 power module is made to expressly fit onto the OWI Model IC6 coaxial speaker providing a high fidelity module of up to 25 watts of Class AB power right at the speaker. By being within inches of the speaker, the amplifier enjoys maximum damping control of the speaker since the speaker sees optimum low source impedance for maximum high fidelity reproduction.
Page 7
Loud music installations, dance floors etc. Provide power at every speaker. Turn their volumes all the way up controlling level at a central location. If a subwoofer is used, crossover at 180 Hz and provide signal the module from 180 Hz and up. A CD output on each channel will power up to 5 power modules.
Page 8
Video __, Electronic __, Mail Order __, Mass Merchandiser __, Installer __ Others (please specify) __________________________________________ Remarks: _____________________________________________________ _____________________________________________________________ Date Purchased: _____________________ Model Number: _____________________ Serial Number: _____________________ (Keep this part for your record) LIMITED WARRANTY (Self-Amplified Speaker) Page 8 of 14 Filename:AMP4IC6 MANUAL 12/12/06...
Page 9
Filename:AMP4IC6 MANUAL Page 9 of 14 12/12/06...
Page 10
Filename:AMP4IC6 MANUAL Page 10 of 14 12/12/06...
Mounting your OWI Speakers Determine the best area to mount your OWI speakers. It will be necessary to run your speaker wires to that location. This location must be free of obstructions, such as electrical conduits, HVAC ducts, or water lines.
Page 12
Attach the speaker wires to the speaker terminals. Insert your OWI speaker into the opening and tighten the four screws. As you tighten the screws, the tabs will automatically flip into an outward position thereby clamping the drywall between the feet and the flange of the speaker.
Page 13
The speakers' other surfaces are primed to accept ordinary latex wall paint or aerosol spray paint. The surface of the speaker behind the grille should remain black and must not be painted. It is necessary to mask this area with the center of the template that you have cut out.
2. If the speaker proves to be defective in materials or workmanship within five years from the date of the original customer purchase, OWI, at its sole option may repair or replace the unit with a current model of equal or greater value.