Advertisement
ELECTRONIC CONTROLS
Use your appliance according to the following
control regulations. Your appliance has the
corresponding functions and modes as the
control panels showed in the pictures below.
When the appliance is powered on for the
first time, the backlighting of the icons on
display panel will start working. If no buttons
have been pressed and the doors are closed,
the backlighting will turn off.
Note: High temperature setting will accelerate
food waste.
Using the control panel
1. Power
To turn the refrigerator on, press the POWER
(3secs) button for 3 seconds. Repeat the
●
process to turn the power off.
Important: Do not store any food in the fridge
during this time.
2. Temperature
For optimum food preservation, we
recommend that when you start your
refrigerator for the first time, the temperature
for the refrigerator is set to 4°C (39°F). If you
want to change the temperature of the
refrigerator, follow the instructions below
Ensure the fridge is unlocked by checking that
there is no light on ECO (Lock Hold). If the
light is on, press and hold for 3 seconds.
To adjust the
●
that the °C light is on near the temperature
display. If the °F is showing, switch the
display mode from °C to °F by pressing the
TEMP (Hold 3s) button for 3 seconds.
Press the TEMP (Hold 3s), until you select the
temperature that you want.
PLEASE NOTE: the fridge will set the
temperature cyclically adjust between 8°C
and 2°C.
To adjust the temperature in Fahrenheit,
check that the °F light is on near the
temperature display. If the °C is showing,
switch the display mode from °F to °C by
pressing the TEMP (Hold 3s) button for 3
seconds.
Press the TEMP (Hold 3s), until you select the
temperature that you want.
PLEASE NOTE: the fridge will set the
temperature cyclically adjust between 46°F
and 36°F.
temperature in Celsius, check
Advertisement
