When To Reconfigure The Workstation - Compaq Professional Workstation AP200 Reference Manual

4-4 Hardware Upgrades
When to Reconfigure the
Workstation
System configuration is the process of specifying the devices and programs that
make up a system. When you add or remove optional devices, you must
reconfigure the workstation by running Computer Setup for the changes to be
recognized.
Run the Computer Setup utility after you complete the installation. To
configure in Windows NT, use Control Panel and configure your specific
option.
If configuration settings are incorrect, one or more devices may not work
properly, and you may receive an error message. If this occurs, run the
Computer Setup utility again. See Chapter 2 of this guide for more information
on Computer Setup.
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: E-CH04.DOC Last Saved On: 1/19/99 9:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED