Upgrading Or Replacing Memory; Removing A Memory Module - Compaq S0000 / 8000 User Manual

Compaq s0000 / 8000 computers user's guide
Table of Contents

Advertisement

102
user's guide
3 Return to "replacing or adding a drive" on page 99, and begin with step 1.
3
2
1
2
replacing the diskette drive adapter on the 8000 series

upgrading or replacing memory

Your PC comes with random access memory (RAM), which temporarily stores
data and instructions on your PC. You can install memory expansion modules in
the memory expansion slots in the PC. The procedures for upgrading or
replacing these modules are the same for the S0000 and 8000 series.

removing a memory module

CAUTION: When handling a memory module, be careful not to
touch any of the contacts. Doing so may damage the module.
1 Complete the procedure described in "preparing the pc" on page 91, but do
not remove the front bezel.
2 Locate the memory module inside your PC. See the following illustration for
the location of the memory modules (1), memory slots (2), and release latches
(3) on the system board.
locating the memory module
4
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Presario s0000 seriesPresario 8000 series

Table of Contents

Save Article as PDF