How To Use The Timer - Oregon Scientific SL928M User Manual

Refer to (FIG. 9) for timer setting mode.
Refer to (FIG. 10) for timer running mode.
Note:
a. There are three modes of operation
stop), CU (count down and count up) or CR (count down, automatic reload
and repeat).
b. The maximum count down or count up time is 23 hours, 59 minutes and 59
seconds. A pre-alert tone will be emitted at five second before completion of a
count cycle and an alert tone will be emitted for 10 sec. upon the completion of
a count cycle. Press any button to mute the alert tone.
c. Once started the Timer can be running in the background even if the unit is in
a different display mode.
Refer to (FIG. 11).
Note:
a. Pacer range from 30 to 240 at five-step intervals, i.e. number of beeping sound
to be heard will be range from 30 beep per minute to 240 beep per mintue.
b. Pacer can be run simultaneously with Chronograph mode. Beeping sound will
be heard and flashing "PACER" icon will be seen during the stopwatch running
mode if pacer is activated.
HOW TO USE THE DAILY ALARM
Refer to (FIG. 12).
Note:
a. The alarm will be automatically activated during the setting procedure.
b. When the alarm is active, an alert tone will go off at 30 seconds. Press any key
to mute the tone.

HOW TO USE THE TIMER

HOW TO USE THE PACER
that can be chosen : CS (count down and
5