Setting The Countdown Timer; To Use The Countdown Timer - Oregon Scientific RMW128C User Manual

To show
Split Time
:
ST/SP
( Start )
SPLIT
( Split )
SPLIT
( Split release )
Note:
The stopwatch can continue to operate in other display modes.
The CHRONO icon will flash to indicate its operation.

SETTING THE COUNTDOWN TIMER

This Timer function can measure up to 99 hours, 59 minutes and 59
seconds.
1. Press and hold the MODE button for 2 seconds in the Timer mode.
ST/SP
2. Enter the hours using the START/STOP (UP) or SPLIT
( Stop )
(DOWN) buttons. Hold down either button to rapidly increase
or decrease the value.
3. Press the MODE button to confirm the entry.
4. Enter the minutes using the START/STOP (UP) or SPLIT
(DOWN) buttons. Press the MODE button to confirm the entry.
5. Then, enter the seconds using the START/STOP (UP) or SPLIT
(DOWN) buttons. Press the MODE button to save the changes
SPLIT
and exit.
( Clear )
To start or stop the Countdown Timer function, press the START/
STOP (UP) button. The Countdown function will continue to
operate in other display modes. The TIMER icon will be flashing
to indicate its operation.
Upon completion of the Countdown function, beep sound will be
turned on for 1 minute.
6

TO USE THE COUNTDOWN TIMER