ION TOTAL PA TITAN User Manual page 9

14. Clip LED
This LED will flash red if the signal from the input jacks or audio source is clipping
(distortion from an overly loud signal). If this happens, decrease the main volume or the
source volume for the Aux or Mic Inputs (if a loud device is plugged into either) using the
Control Knob.
15. Power Switch
Turns Total PA™ Titan on or o . When the power is on, the Power LED will be lit green.
16. Power Cable Input (IEC)
Connect the included power cable here to power the unit.
ION Audio Total PA™ Titan User Guide 9