Linking Two Speakers - ION TOTAL PA TITAN User Manual

Linking Two Speakers

If you would like to play music from a Bluetooth device, you can first "link" two Total PA™
Titan speakers together in order to listen to your music in stereo. One Total PA™ Titan will
serve as the left speaker and the other will serve as the right speaker.
1 - PRESS & HOLD
To link two Total PA™ Titan speakers together:
1. Press and hold the Stereo-Link
mode. You will hear a tone, and the word LINK will flash on each speaker's Display while
they search for each other. Once a link has been established, the word LINK will remain on
the Display.
Note: The linking process can take up to a minute to complete. The closer the two speakers
are to each other, the quicker the link is established.
2. Once the two speakers are linked, press and release the Source button on either speaker
to select Bluetooth mode and begin the Bluetooth pairing process. The speaker you use
for Bluetooth pairing will serve as the primary speaker. On its Display screen, the Bluetooth
icon will flash to indicate that Bluetooth pairing is in process.
3. Navigate to your Bluetooth device's setup screen, find Total PA™ Titan and connect. When
your Bluetooth device is connected, the Bluetooth icon will be lit solid on the primary
speaker's Display, and you will be able to play audio from the Bluetooth device through
your two linked speakers.
To disconnect two speakers or cancel linking between the two, double press the Stereo-
Link TM / Repeat button on either speaker.
ION Audio Total PA™ Titan User Guide
(speaker 1)
TM / Repeat button on both speakers to enter Stereo-Link™
2 - PRESS & HOLD
(speaker 2)
12