Record Setup; Policy - Vista Viper series User Manual

Table of Contents

1) Live Screen: Select split modes for the Live screen. 4-split screens by default.

2) Play Screen: single screen and 4 split mode are default.

3) When the screen mode setup is done, click OK.

Live Screen: Use Secondary Stream.

If the Use Secondary Stream box is selected, the second stream will be used on multi view mode. If it

is unchecked, the multi view will use only primary stream.

Single, PIP and 4-split channel mode will always use primary stream.

3.2. Record Setup

With this menu, you can set all parameters (see the picture as below) related to recording for each

camera independently. Use direction keys and ENTER button to select the camera (channel) and

change the setup value.

NVR can record a live video by manual, schedule, event (motion detection and/or external sensor) and

by network user's command. You can set the recording policy for each camera independently.

1) Manual (R) [ON / OFF]

ON: When turned ON, you can start recording manually by pressing a REC button on the launcher (or

by clicking REC icon on mouse menu). Press REC key again to stop recording.

OFF: Manual recording is disabled on selected camera(s).

VIPER user manual V1.0

Table of Contents