Advertisement
LOW BATTERY WARNING
There are two low-battery indicators [
the rain collection unit is shown as " [
indicator for the main unit is shown as [
batteries immediately when the respective indicator lights up.
Note : Every time the batteries in the main unit are changed,
it is necessary to repeat installation steps 6 through
7 prior to use.
SETTING THE CLOCK & CALENDAR
1. Press and hold the MODE/SET button for 2 seconds.
2. Choose the 12- or 24-hour display format by pressing the
HISTORY button. Press the MODE/SET button to confirm.
3. Press and hold the MODE/SET button again. This time the
Clock will be displayed and the Hour will be flashing.
4. Press the HISTORY button once to increase its value by one.
Press the MODE/SET button to confirm its value.
5. The Minute will then be flashing. Repeat (4) to set the
minute.
6. The calendar will now be displayed. Press and hold the
MODE/SET button for 2 seconds.
flashing. Repeat (4) again to set the current month, day and
calen dar display format (mm:dd or dd:mm).
7. After setting all values, the clock will be displayed.
8. To display the calendar, press the MODE/SET button twice.
9. To display the clock again, press the MODE/SET button
twice.
TOTAL RAINFALL
The total rainfall is displayed on the top window of the LCD
display. Upon initial activation, the rainfall amount will be
displayed in millimeters. Use the [IN/MM] switch to select
between inches and millimeters.
To display the start date of the record, press [SINCE] once.
The date will appear on top of the LCD screen. To clear the
record, hold [SINCE] for two seconds and the current date will
be set as the start date. Note that this will also clear the total
and current rainfall.
RAINFALL HISTORY
The rainfall history is displayed on the bottom window of the
LCD display. Zero (0) indicates the record for the current day.
Records for previous days are shown with a minus (-) sign; for
example : (-1) is the record for the previous day and (-2) would
be the record for two days preceding the current day. Press the
[History] button to scan the records of each day. A total of 9
day's rainfall history can be recorded and displayed.
To clear the current day rainfall, hold
seconds. Note that this will also clear the total rainfall record
and start date of the record.
]. The indicator for
] out", and the
The RF signal indicator shows the signal-receiving status of the
]. Replace the
main unit. There are three possible forms:
The success of wireless data transmission may vary and is directly
related to the positioning of the remote rain collector and the
environmental factors of that location. Should there be difficulty
in data transmission or should the main unit display go blank,
press [ SEARCH] to initiate a search signal between the main
unit and the Rain Collector unit.
If main unit remains blank verify that:
-
-
The month will be
-
Then press [SEARCH] again.
To reset the main unit, press the Reset button using a blunt stylus
to hold down the button. All main unit settings will return to
their original default values.
TABLE STANDING OR WALL MOUNTING
Table-Standing :
Your unit comes with stand connector for connecting it to other
modular units.
[SINCE]
for two
3
HOW TO READ
THE RF SIGNAL INDICATOR
The unit is in searching mode.
Transmission data are securely
registered.
No signals.
INTERRUPTED SIGNALS
The remote rain collector is still in place.
The batteries of both the main unit and rain collector are
good. Replace if necessary.
The transmission is within range and path is clear of
obstacles and interference. Shorten the distance if necessary.
THE RESET BUTTON
STAND
CONNECTOR
Advertisement
