Backlight; Reset System; Safety And Care; Warnings - Oregon Scientific BAR998HGA User Manual

BACKLIGHT

Press SNOOZE / LIGHT to illuminate the backlight for 5
seconds.

RESET SYSTEM

The RESET buttons are located on the back of the main unit
and in the battery compartment for the sensors. Press RESET
when you change the batteries and whenever performance
is not behaving as expected (for example, unable to establish
radio frequency link with remote unit or radio-controlled clock).
NOTE
When you press RESET, all settings will return to
default value, and you will lose all stored information.

SAFETY AND CARE

Clean the unit with a slightly damp cloth and alcohol- free
mild detergent. Avoid dropping the unit or placing it in a high-
traffic location.
This product is designed to give you years of service if
handled properly. Observe the following guidelines:
Never immerse the unit in water. This can cause electrical
shock and damage the unit.
Do not subject the main unit to extreme force, shock,
or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of different
types.
Do not use rechargeable batteries with this product.
Remove the batteries if storing this product for a long
period of time.
Do not scratch the LCD display.
Do not make any changes or modifications to this product.
Unauthorized changes may void your right to use the product.
The technical specification of this product and contents of
this user guide are subject to change without notice. Images
not drawn to scale.
17

WARNINGS