Getting Started; Charging The Battery Pack For The First Time - Compaq Armada M700 Series Reference Manual

chapter
G
ETTING
Before you use your computer for the first time, you will have to
complete some preliminary setup procedures. This chapter
explains how to charge your battery pack for the first time and
how to set up your computer and software.

Charging the Battery Pack for the First Time

The battery pack begins to charge as soon as the computer is
connected to external power. Fully charge the battery pack before
using it for the first time.
A new battery pack must completely charge before the computer
is disconnected from external power. The battery pack is fully
charged when the battery charge light turns off. A battery charges
faster if the computer is not being used.
IMPORTANT:
accurately display the percent of a full charge remaining in the
battery pack only once the battery has been fully charged.
1
S
TARTED
The battery charge level lights on a new battery pack

Getting Started 1-1